3 pulley for sale, brand-new and used.

Genuine U.S. Military Issue Surplus   Dual Wheel Steel Pulley with Metal Bracket We do not see any casting numbers or markings on this item. :The overall size is 5 5/8" x 4 1/2" x 6 5/8" The wheels are 1 1/4" x 5 5/8" Diameter The grooves of the pulley wheels are 3/4" wide at the outer edge and tapers down to 1/4".

The snatch block is used and shows some wear but still in good working condition. I cannot find any written or weight limit on the snatch block. The pulley appear to be able to handle up to 3/4" rope or cable.

You are bidding on a NEW Tuff Tug 4" diameter sheave block pulley. 3000# load capacity. 3/8" diameter max cable.

I HAVE PROVIDED PICTURES AND WILL GLADLY ANSWER ANY QUESTIONS. THIS WAS PURCAHSED NEW FOR A SINGLE PROJECT AND WAS NEVER ACTUALLY USED AND WAS STORED IN THE PROJECT TOOL TRAILER. THE KIT IS COMPLETE, EVERYTHING WORKS AND I HAVE PROVIDED THE INFORMATION BELOW.

34x3/8 a Pulley V-Belt Model: 3L340 Made in: Mexico Manufacturer: Gates Rubber Pvt Lbl. Weight:

37x21/32 B Pulley V-Belt Model: 5L370 Made in: United States Manufacturer: Gates Rubber Pvt Lbl. W

20x3/8 a Pulley V-Belt Model: 3L200 Made in: Mexico Manufacturer: Gates Rubber Pvt Lbl. Weight:

No 4186 We are a couple who are offering for sale items, from our recently closed Detroit area tool & die shop, after 30 plus years in the business, as well as surplus personal item from our recent divorce.

No 4185 We are a couple who are offering for sale items, from our recently closed Detroit area tool & die shop, after 30 plus years in the business, as well as surplus personal item from our recent divorce.

No 4184 We are a couple who are offering for sale items, from our recently closed Detroit area tool & die shop, after 30 plus years in the business, as well as surplus personal item from our recent divorce.

Head Stock Pulley #XL-1528-50 with Integral 32T Gear, Under Drive Pulley #A1505 with Drive Belts for XL Series 10" Sheldon Lathe with "E" Type Motor Drive Head stock pulley has 1 13/16" bore, 4 9/16" OD bull gear hub with good plunger holes, under drive is 3 9/16" OD with 7/8" keyed bore, both have 5/8" top width double grooves, minor wear, belts are Gates B-47 hi-power, look matched but cannot identify any match marks, some wear, no cracks or splits.

Motor Drive Pulley #A-1500 and Counter Shaft Pulley #E1514 for XL Series 10" Sheldon Lathe with "E" Type Motor Drive Motor pulley is 3 1/2" OD with 3/4" keyed bore, counter shaft pulley is 9" OD with 15/16" keyed bore, 1/2" top groove width on both, minor wear. No international, ask questions before bidding, always happy to combine shipping when possible.

Fits Asian Mini Lathe 7x10,12, & 14 - Pulley/Belt Speed Reduction Kit Aluminum XL pulleys & belt - there are (2) 4mm set screws on the hub of the small pulley (10 teeth) 3 to 1 reduction instead of OEM 1.82 to 1 (large pulley: 30 teeth) 40% power increase ideal for spinning 4 & 5" chucks (note: this upgrade lowers Max RPM in low gear to approx.

Countershaft and pulley for a

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915 and 1916, Volume 2, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2008. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-371-3.

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.

Classic Archives Listing

Classic Archives Listing