3.5 displacement for sale, brand-new and used.

X-150 early entry saw for sawcutting control joints in freshly poured concrete floor slabs. This saw is used but in very good condition and product specs are as follows: Engine Motor manufacturer Subaru Motor spec EX13 Max output (As rated by the engine manufacturer) 3.2 kW / 4.3 hp Engine/motor RPM pos1:4000 rpm Cylinders 1 Number of strokes 4-stroke engine Cylinder displacement 7.69 cu.inch Cylinder bore 2.28 inch Cylinder stroke 1.89 inch Fuel

Unit No. 1 200 HP Lincoln Electric Motor and Back-to-Back (Through Drive) (Bosch) Rexroth Hydraulic Pumps - Hydrostatic Drives Axial Piston Variable Pumps – (A)A10VSO Variable axial piston pump of swashplate design for hydrostatic drives in open circuits The flow is proportional to the drive speed and displacement.

This is off a machine that never did get used. It's inlet is 1/2" Female NPT and the outlet is a 1/4" male NPT. General Information Case Drain: No Case Drain Inlet And Outlet Ports Size: Manifold Ports 5/16"-18 UNC Thread Geometric Displacement (cu-iIn./rev): 14.10 Output Shaft Size: 1" Straight With Woodruff Key Series: H Series Gerotor Motor SPECIAL FEATURES: Not Listed Type Of Mount: 4 Bolt - 1-3/4" Pilot Dia.

SRVM6911H (60 data sets) Bearing Vibration FFT Analyzer Data Collector Spectrum (Courier/Express Free Shipping!

SRVM6909Z-6 Multi-Parameter Machine Condition Checker Multi-parameter vibration (Courier/Express Free Shipping!

THIS EQUIPMENT BRAND IS AS GOOD AS CANON, GRACO AND OTHERS WORLD BRANDS info extracted from http://www.konal.com

For Sale / Bid -ONE --- Cummins Diesel Engine -- Model CFP15E-30 Basic Specifications:Engine Series: Cummins QSX15 SeriesRatings: 575HP @ 2100 RPM’s (429 KW)Exhaust Emissions: CFP15E-F30, EPA/Carb Tier 3Displacement: 915 inches (15.0 Liter)

NEW Rexroth Hydraulic Pump function fadeIn(objId,opacity) { if (document.getElementById) { obj = document.getElementById(objId); if (opacity

NorTrac 12 Volt DC Hydraulic Power Unit — Lift-Hold-Lower Applications, Model# YBZ5-F2.1B1W2/WUAAT1 Large 1.32 gallon reservoir capacity •Heavy-duty 12 Volt, 2 HP motor delivers 3,000 max. RPM •1.5 GPM flow rate •2.4cc displacement •9/16-18 SAE O-rings on the outlet ports Product Summary This NorTrac 12 Volt DC Power Unit with fast-acting lift speed can be used for OEM or replacement. The power up, gravity down circuit allows for easy lifting and lowering.

Char-Lynn (Eaton) 158-3006-001 Hydraulic motor This Char-Lynn 158-3006-001 motor was purchased new and has never been used. Mainly used for winch applications.

Product Description Fixed Displacement Motor A2FM open and closed circuits Sizes 5...1000 Series 6 Nom. Pressure up to 400 bar Peak Pressure up to 450 bar A2FM RE 91 001/09.00 Features – Fixed displacement motor A2FM of axial piston, bent axis design,

Product Description Fixed Displacement Motor A2FM open and closed circuits Sizes 5...1000 Series 6 Nom. Pressure up to 400 bar Peak Pressure up to 450 bar A2FM RE 91 001/09.00 Features – Fixed displacement motor A2FM of axial piston, bent axis design,

Used- Pacific 16-He

J. Little Mercer Co., Inc. Stock no.

Power Systems Plus Inc. pride ourselves on providing personalized and excellent service to our customers. We have been serving Oregon and the Pacific NW since 1999.

Power Systems Plus Inc. pride ourselves on providing personalized and excellent service to our customers. We have been serving Oregon and the Pacific NW since 1999.