Exclusive Breathe-Cool II® System! This system is for workers who are working in a toxic environment. Place the air pump in a clean air area, and it will provide a continuous flow of cool clean air to the headpiece or facepiece.
Portable! Exclusive Breathe-Cool II® System! This system was designed for refinishers when cartridge type respirators are not allowed or clog too quickly (spraying isocyanates, stri
Skylotec The Shockyard Flex V ALU is a 6 ft. twin-leg lanyard that provides lightweight 100% tie-off for at-height workers. All aluminum hardware reduces the weight of the L-0517-1,8 to below 4 lbs.
PFERD power threaded stringer bead knot wheel brush is tightly twisted for low flex, high impact brushing action. Designed for root and hot pass weld cleaning in pipe joining applications. Also for general use where a narrow face, aggressive brush is desired for controlled, confined surface contact area.
These cutters are ground to any size your valves are with a bit oversize for piston rock & valve flex. The rods fit your guide diameters as 7 m/m,8 m/m, 5/16",11/32", & 3/8" Diameters. We also have a 3/4" shank too for the mill !They spin freely with a 3/8" electric drill and fit up in the seats to start.
Brown & Sharpe Mfg. Co. Rubber Flex Collet Set (0.100" to 0.750") B&S #11 or 11C Rubberflex Collets This set includes 13 collets, 2 sleeves & and chuck nut in nice wood case.
This is a Flex Arm Deburrer. Essentially, it is a scissors type extension mechanism that holds a pneumatic deburring tool that has a chuck. It is 22-3/4" high and has a reach of about 40".
Here is a used Starrett starter package deal. This is a starter package for the beginer or to have a set around the shop so you won't have to run back and forth for your tools. This consists of a #657 magnetic base with post and #196 back plunge indicator.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
