3/4 lb cover for sale, brand-new and used.

You are bidding for a lightly used Applied Motion Products HT23-549 NEMA 23 stepper motor, 167 oz-in bipolar holding torque, 8 wires, single shaft, 4.5" to 6" long cable. Guaranteed fully functional. Part Number

Item will ship as shown. No manuals, software, or interfacing hardware or cables are included. It is in used condition with only some light cosmetic wear to the casing area from being handled (does not affect its operation).

var subs_array = new Array("sub1","sub2"); var tabs_array = new Array("tab1","tab2"); var subs1_array = new Array("sub21","sub22","sub23","sub24","sub25"); var tabs1_array =

var subs_array = new Array("sub1","sub2"); var tabs_array = new Array("tab1","tab2"); var subs1_array = new Array("sub21","sub22","sub23","sub24","sub25"); var tabs1_array =

Schneider Electric Variable Frequency Drive - Altivar 212 ATV212HU30M3X 3kW/3HP This product is new without packaging or documentation, the documentation is available from the manufacturers web site. This unit was purchased for a for a project that was never started, it has been powered on, tested and reset to factory defaults. Specs are from manufacturers web site: Main

The items are USED and sold AS-IS, but were removed from service in a working condition. Below are the detail from the manufacturers page and I believe all products are current. Stepper Motor The HT34-490 two-phase stepper motor is designed for use with the STAC6 series of stepper drives (120 VAC input versions only) and is suitable for a wide range of motion control applications.

WE ARE SELLING A USED DAYTON AC GEARMOTOR PARALLEL SHAFT 115/230 VOLTS AC 156RPM MODEL# 6Z822A WITH AN ATTACHED GEAR, !! THIS MOTOR IS MISSING THE COVER PLATE TO THE WIRING I DO NOT HAVE THAT AVAILABLE!!! Item AC Gearmotor Type: Parallel Shaft Voltage Rating: 115/230 Phase: 1 Hz: 60/50 Shaft Orientation: Parallel Nameplate RPM: 156 Full Load Torque (In.-Lbs.): 60 Overhung Load (Lb.): 175 Input HP: 1/6 Gear Ratio: 11:1 Full Load Amps: 2.1/1.1 Enclosure: TEFC Thermal Protection: None Ambient

GOULD PERMANENT MAGNET SERVO MOTOR 16-0375-05 BACK EMF KE: 79.5 V/KRPM RATED CURRENT IC STAL: 33 AMP TORQUE CONSTANT KT: 6.72 LB-IN/AMP OUTLINE DRWG: 201-233-2121

While Brand new, in its original shipping box, this unit is untested. Thanks for looking at my items. I am splitting my time between two cities.

AGP3500-T1-D24 HMI 10.4" 640x480 DC24V with Ethernet CF card New AGP3500-T1-D24 specifications:

AGP3600-T1-D24 HMI 12.1" 800*600 DC24V with Ethernet CF card New AGP3600-T1-D24 specifications:

ALLEN BRADLEY RELAY 700-HA32A1 SER C 120Vac 8 PINS w/ BASE 700-HN202 LOT OF 4 SELLING ITEM AS PICTURED PLEASE NOTICE ONE ITEM IS MISSING COVER

Payment Policy Brand New Sony CyberShot 8 MP Di

Sew-Eurodrive Inc with gear reducer. MTR type DFT80N48MG 1 HR, Gear, R47DT80N4BM6 1 HR. Gear Box, Ratio 23.28, Service Factor 3.1, Torque 660 lb IN, Motor 208/360Y, Continous Duty, RPM 1700 Brake Volts 200 AC, Torque 7.4 lb ft.

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

This listing is for a new Siemens industrial electric motor. It runs 3555 RPM on 400/460V and is a 30HP unit. It is powerful but not a stock model.

Description This item is used and in good condition. It could use a good cleaning. Here are some of the specifications off of this item; Part number - GMP3336 Frame - PSLH-1 Voltage - 208-230/460 Phase - 3 Amperage - 1.4-1.45/0.74 RPM - 1725 Shaft diameter - 3/4" Ratio - 10:1 Torque - 109 IN/LB

Baldor electric servo motor, catalog #BSM100B-2250AAX, BSM100B-2250AA, S4P004W031G1, spec #S4P004W031G1, new spec #S4P100W031G1, rated speed 1200rpm, with resolver, with thermostats, servo motor, 230/460volts, 1200 rpm, 3 phase, 60 hz, TENV, 3ph, 230/460vac, Baldor, BSM100B-2250AA, continuous stall torque 12nm, torque cont. stall 12nm, current cont, stall 6.08 amps, rated buss voltage 300vac, rated speed 1200rpm, peak current 16 amps, Cont.