3/4 shaft for sale, brand-new and used.

End Mill This is a Fargo 3/8-18 NPSF HSG 4 Flute Pipe Tap Lightly Used. The tap appears to have been lighlty used by the previous owner and shows some light scratching around the shaft and some oil / discoloration on the tap end. Overall the tap appears in very good condition and none of the small imperfections should impact the performance of the product.

var itemNumber = window.ebayItemID ?

We have a Spindle Drive Transmission for a Brown & Sharpe P.T.C. Production Turning Center Model 60 Automatic Screw Machine. This is an original replacement part in new condition, never used.

SOLID Aluminum with 1/2" thick steel plate base and steel bearing housing. Four inch spiral mandrel tapers from 3/4" to 3/16" pointed tip. Industrial quality machinery.

Motor Drive Pulley #A-1500 and Counter Shaft Pulley #E1514 for XL Series 10" Sheldon Lathe with "E" Type Motor Drive Motor pulley is 3 1/2" OD with 3/4" keyed bore, counter shaft pulley is 9" OD with 15/16" keyed bore, 1/2" top groove width on both, minor wear. No international, ask questions before bidding, always happy to combine shipping when possible.

This Zen Toolworks 12x12 DIY CNC is turn key, ready to go. All you need to start making chips is a PC with a parallel port and controller software installed(Mach3 is a great option). The CNC was

This 4 pc set is now being offered with our PREMIUM X-BARS. Note regarding fit: Measure your inside, front to back, bed gap. These 4 bars are intended for stand alone use on 20 ton (or less) presses with, front to back, gap of about 4.25 inches.

SHAFT ALIGNMENT DIAL INDICATOR ROLLER CHAIN JIG MILLWRIGHT & MAINTENANCE IT'S ON EVERY MILLWRIGHT AND MAINTENANCE TOOL LIST A TRUE CRAFTSMAN MUST HAVE AT LEAST ONE IN THEIR TOOLBOX NOTE "TWO ARE NEEDED FOR REVERSE AND NEW METHOD OF ALIGNMENT PROCUDURES OVER 35 YEARS OF EXPERIENCE WENT INTO THIS ONE 6061 AIRCRAFT ALUMINUM

James Nasmyth: An Autobiography, edited by Samuel Smiles, originally published by Harper & Brothers, new York, NY, 1884. Reprinted by Lindsay Publications, Bradley, Ill., 1989. 4 x 7 paperback, xviii + 461 pages.

Click here to request a quote with price on this stock number from Gray

-New steel shaft reducing bushing -Slips over 5/8 shaft and accepts 3/4 pulley or gear etc. -3/16" open slot for keyway or set screw -Zinc plated steel -I.D.: 5/8" -Length: 1-1/4" -O.D.: 3/4"

AS IS.  Threaded work shaft bearing 1 OD thread 3/4 depth with stop hilt shaper CNC mill.  Shaft to hilt is 3.5" long.

LOCATED IN PRESCOTT ARIZONA 86301 *B16 Drill Chuck with Machined Shaft Turkey Logo 1.5 - 13 MM Size* Up for sale is a new B16 Drill chuck with a machined shaft attached. The small end of the shaft measures 3/8" diameter by 1" long and the larger shaft measures 3/4" diameter by 3 3/16" long. The chuck is marked B16, a turkey logo and 1.5 - 13 MM.

2 mandrels and a cylinder. Since I have not had them hooked to a motor, I am selling as-is. Craftsman mandrel with 3/8" V belt & pulley wheel.

TAPERED ARBOR MANDREL - THREADED MANDREL SCREW THREAD - 1/4" SHAFT 6-PCS

TAPERED THREADED MANDREL POINT MANDRELS - SCREW THREAD