3/8 bushings for sale, brand-new and used.

Tornos Delta 20/3Model Year 2011 Serial Number:

This is a Used adjustable floating tool holder in very good condition.Because it's adjustable, it's great for lathes or automatics that have wear and are out of center.No need for bushings, holds securely and clamp is reversible. The shank has a screwfor setting a stop.See DrawingA = 3/4 B = 1-1/2 C = 1-1/4 D = 2-5/8 E = 7/16Capacity = Min. 1/16 Max.

This is a Used adjustable floating tool holder in very good condition.Because it's adjustable, it's great for lathes or automatics that have wear and are out of center.No need for bushings, holds securely and clamp is reversible. The shank has a screwfor setting a stop.See DrawingA = 3/4 B = 1-1/2 C = 1-1/4 D = 2-5/8 E = 7/16Capacity = Min. 1/16 Max.

Auction for several Fette thread rolling machine replacement parts.   The majority of the parts are labeled as to what they are, & some are by your identification only. 

2mm drill bushings price each, 24 available, message me and we can work out what you need, ready to deal. Guide drill bits with these metric bushings, also known as "PM" bushings. They permanently mount flush with jig

UP FOR SALE IS THIS ALUMINUM OFF SET DRILL BAR MADE OF 6061 T6 ALUMINUM. THE BAR HAS A 3/8 I.D. PRESS FIT BUSHING INSTALLED IN IT.

Thank You For Looking At Our Products Product Information:Multiple Spindle Drill Press Head Product Features & Specifications:Set for Small CapacitySpindles Set At 2-1/2" On Cen

Like New Westhoff Model 100 Ultra-Sensitive Drilling Machine MAKE: WESTHOFF MODEL: 100 Overall Size: 18” high x 24” wide x 26” long weight: 50lbs Head Travel: 4-1/2” Vertical Horizontal Travel: 12” Work Table: 8-1/2” x 8-1/2” with 8-1/2” travel (100-1) Work Table Load: 30lbs Rheostat Speed: 0 - 15,000 rpm Motor: 1/10hp, 115vac Chuck: Albrecht Keyless, 0 -1/8” capacity with through hole 3/32” x 5” Bearings: Linear Ball Bushings for ease of linear motion

No# 0 Mitts &

WE ALWAYS CONSIDER ALL REASONABLE OFFERS AND MANY ARE PROMPTLY ACCEPTED! You are invited to purchase or "MAKE YOUR BEST OFFER" ON A BLACK DIAMOND DRILL GRINDER MODEL BW 80, 4 91 COLLETS AND SLEEVES, WORK LIGHT WITH ADDITIONAL ACCESSORIES,

Dumore 3/4 hp Tool Post Grinder HUGE LOT This is a HUGE lot consisting of Dumore Grinder, three (3) spindles, four spindle attachments, and much more. Everything is in excellent condition. Dumore Tool Post Grinder Cat no:57-031 Model no: 8526 120 volts 8.2 amps 3/4 hp Three (3) spindles 1.

END MILL SHARPNER IN NEW CONDITION. COMES WITH 2 SPINDLES WITH 4 BUSHINGS, 3/16" DIA , 3/8" DIA. 3/4" DIA, 7/8" DIA.

UNIMAT SL DB Lathe Accessory Connects a standard Jacobs drill chuck to UNIMAT tailstock M12-

Package of two adapters M14-1.0 bushings (female) to M12-1.0 bolt end (male), steel and M12-1.0 bushings (female) to M14-1.0 bolt end (male), steel The pieces are machined from one side using a MT collet chuck on a lathe with runout of 0.0004"-0.0006" Thus, it has the smallest runout (TIR) we can make. However, if the adapt

Kearney & Trecker Milling Cutter 8"  x 1-3/8" has removable 1" id bushings  If you remove the bushings it measures