368 8 for sale, brand-new and used.

Vintage Doall Form Dresser for Surface Grinder with case and attachments pictured. The form dresser measures about 12" L x 5 5/8" W x 7 1/2" H. Made in the U.S.A.

Set of knurling tool wheels, model C-11.There is a W brand marking at the top of each wheel. Outer diameter of 3/4" and inner diameter of 1/4". Wheels are 3/8" thick.

Set of two unmarked knurling tool wheels. Outer diameter of 3/4" and inner diameter of 1/4". Wheels are 3/8" thick.

Used lathe lantern style tool holder. 6 3/4" tall. Opening is 3/4" wide and the bottom base is 2 1/8" x 2 3/8".

Used tailstock turret lathe multi-head tool holder. 2 Morse taper inside, 3 Morse taper outside. Has the marking RRK-66.1.

Used Kearney & Trecker dividing head with a 6 1/4" diameter. Comes with 7 total plates ( 5 3/8" diameter) and a tail stock. Please take a close look at all of the photos.

This lathe milling attachment appears to be in good working order. It is dirty but does not seem abused or even rusty. There are two planes of rotation.

Set of Armstrong knurling tool wheels. Model 8227, marked L and R and High Speed. Outer diameter of 5/8" and inner diameter of 1/4".

Item#3962 Astec Model CDH-2A Hole Popper Equipped With: Machine Specifications: Work table, (260 x 314 mm) 10.2" x 12.3" Work table height, (54.5 mm) 2 9/64" Work tank, (368 x 463 mm) 14 31/64" x 18 15/64" Maximum work piece height, (240 mm) 9 29

Pair of Precision Machinist Blocks. 8X3X3/4" and 8X3X1/2" Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in!

Lot of three height scribers/scribes for height gauge. Measurements are as follows: Top: 7" L x 1 3/16" T x 3/8" Th, bar end measures 3/8" Th x 3/8" T.Middle: 2 3/8" L x 1 3/16" T x 1/4" Th, bar end measures 3/8" Th x 1/2" T.Bottom: 2 5/16" L x 1 3/16" T x 1/4" Th, bar end measures 1/4" Th x 1/2" T. Conditions are as pictured, good but not pristine, please examine pictures closely.

Indicator Stand/Base with Magnet. No brand name.Magnet switch is stuck. Stands 9 Inches TallThe Bar is 7 Inches.

Item is an Enco Indicator Stand/Base with working magnet and gage.Stands 9 1/2 Inches High.Bar is 7 Inches.Gage is Federal C81Q, 001 Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 10

For Sale: Magnetic Base Indicator Stand. Stand has a strong magnetic pull with an on/off switch for the magnet. However the magnet will not turn off, nor will switch move into the off position Stand post measures 6 5/8" long Feel free to contact us by phone or email with any questions or concerns.

For Sale: Magnetic Base Indicator Stand. Stand has a strong magnetic pull and has a functioning on off switch for the magnet Stand post measures 7" long Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a

MITUTOYO 1.000 to 1.200" HOLTEST INSIDE BORE .0002" MICROMETER 368-807 You are bidding on a Mitutoyo 1.000 to 1.200" Holtest Internal 3 Point Interchangeable Anvil Type Micrometer with Master, Model 368-807 - Recently Calibrated. These Holtests are versatile, self-centering three-point internal micrometers for the accurate and efficient direct-measurement of internal diameters.

Featured Item: Mitutoyo 368-278 Holtest Vernier Inside Micrometer, Three-Point, 8-9" Range, 0.0002" Graduation, +/-0.00025" Accuracy Item Condition: New Product Description:

The Mitutoyo 368-917 Holtest three-point micrometer set has TiN-coated points, a measurement range of 0.5-0.8”, and is precise to 0.0002”, with + or - 0.0001” of accuracy. Titanium nitride (TiN)-coated measuring contact points offer durability and impact re