A nice, very clean used Brown & Sharpe No. 928-100 Perma Sine permanent magnetic chuck. The plate measures 12" x 6" and there is an adjustable rail along the length.
Oliver, Hardinge, South Bend Face Plate 2 1/4 Inches Tall 3 1/8 Inches Across Hole Diameter is 1 1/2 Inches TPI 8 Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING.
Oliver, Hardinge, South Bend Face Plate 2 Inches Tall 4 Inches Across Hole Diameter is 1 1/4 Inches TPI 8 Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING.
For Sale: DE Whiton Machine Co 14" lathe chuck 4 independent reversible jaws. In good shape for it's age. Feel free to contact us by phone or email with any questions or concerns.
Lot of 3 Hartford 8" super spacer master plates. Two of the plates are Duplex, model numbers C688A (11 notch) and C689B (8 notch). Please take a close look at all photos.
Used 8" Hartford Super Spacer with 24 notch master plate. Included with the spacer are six more plates; 3 notch (x1), 4 notch (x1), 6 notch (x1), 12 notch (x2), 3 replacement chuck jaws, 1 tailstock, and 2 chuck keys. Serial No-11437.
For sale: 15 Bridgeport Rotary Table. The table's serial number is 3544 and measures 15" across as indicated by the pictures above. All components of this table are in tact but it does need work as it does not rotate.
Used but not abused Vintage 8" Cross Slide Rotary Table, Made in the USA. Top is 8" in diameter. 3/4" deep T slots are 1" deep at the bottom for 5/16", then 5/8" wide the rest of the way up, the center recessed area is about 1 5/8" in diameter.
This Vise has 4" jaws that are 1 1/8" tall. It measures 13 3/8" long, with a 1 1/2" tall base, and the height from the bottom of the vise to the top of the jaws is 2 5/8".
This Precision Toolmaker's Vise has 3" machined jaws that open to 3 3/8". It measures 9 1/2" long to the end of the handle and 2 1/2" tall. All parts move smoothly, and are fully functional.
Great little vise that can swivel your work to the angle you need. Vacuum base allows you to position the base where you need it. Clamp is in working condition, jaw opens to 2 3/4" wide and jaws measure __.
Cito Manifold Red, Type M-4. 4-4 BCD 6-1/4" Inlet, 3/4" Inlet Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in!
Cito Manifold Blue, 4-4 1/4" Inlet 3/8" Inlet Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING.
Plakie Children’s Toys were made in Youngstown, Ohio from the 1920’s (wooden) until the 1970’s and sold nationally in many Toy / Christmas catalogs and department stores. The infant’s “Play Key” was a very popular item. This is the actual tooling that pressed some of the original toys.
This listing is for a KR-G8 cloth cutter made by U.S. Cloth Cutting Machine Co. The cutter stands 20" tall, has a 9-1/2" x 7-1/2" base and is equipped with an 8" blade.
More woodshop machinery photos at this link: http://www.pleasantstmachinery.com/ Model 14-300 Delta Sensitive drill, bench mount, with 12x14 production table. 7 inch throat. Sold used, as is, appears ready to go.
More woodshop machinery photos at this link: http://www.pleasantstmachinery.com/ Eastman Kodak Brute fabric cutter, model 627. 2 speed 3450 rpm and 1725rpm. On board grinding stone for blade sharpening.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.