4 inch hydraulic cylinder for sale, brand-new and used.

This listings for a ENERPAC RSM-300 LOW PRO hydraulic Cylinder. This is a very nice unit that has been tested and its ready for service. Made in the USA.

The nylon-covered aluminum base, glass-filled nylon reservoir, and fiberglass handle provide corrosion resistance and are lighter than steel hydraulic hand pumps. The hand pump has a pressure rating of 10,000 pounds per square inch (psi) and an internal pressure relief valve that protects against overloading the pump. The two-speed operation requires up to 78% fewer handle strokes than single-speed hydraulic hand pumps, and the handle locks into place for secure transport.

Product Description The Enerpac P-2282 ultra high-pressure hydraulic hand pump is for lifting, bolting, or applying pressure in intermittent and non-repetitive construction, manufacturing, and maintenance and repair applications. The hand pump can advance and retract a single-acting cylinder or power a hydraulic tool (sold separately) and can hold a load. This pump does not have an internal pressure relief valve and must be used at all times with a pressure gauge (sold separately).

This is a New HIGH FLOW Hydraulic pump for a Bobcat 853 with the HIGH FLOW option.

Miller's Woodcutting 3pt Log Grapple Make your own hydraulically operated log grapple to mount off of a tractor's category 1 3pt Hitch. The tractor will need one set of hydraulic remotes to operate the grapple cylinder. Pick up and place logs without ever leaving the tractor seat.

12 TON CAPACITY 1-5/8 INCH STROKE LENGTH OPTIONAL OIL CAPACITY 4. 5 COPPER INCH GB CH1211 12 TON HYDRAULIC CYLINDER

Good quality hydraulic cylinder ,19" long bolt hole to bolt hole when compressed, and 27" at full length, casing is 4"x4" and the bolt hole diameter is about an inch.

This is used,It works perfect and is an awesome unit.

Auctioning off 1 Lot of parker hydraulic cylinders You Get- Quantity of 13 - Parker model JB2HLT24A hydraulic cylinder. These cylinders have 2" bore and 6" stroke. Max working pressure of 3000 psi.

Gardner Bender CH1211 12 Ton K O Hydraulic Cylinder has a capacity of 12 tons with a 1.63-Inch stroke. This hydraulic cylinders collapsed height is 4.75-Inch and its extended height is 6.38-Inch. Since 1959, Gardner Bender branded electrical tools, voltage testers, wire management products and professional equipment have been a mai

Alemite 308730 Hydraulic Coupler, Narrow, 1/8" Female NPTF

This is an old new product. Has been sitting in the original box ever since it was bought new. The box isn't the best from sitting around and I may ship in a different box.

The Enerpac PAMG-1402N Turbo II two-speed hydraulic air pump is for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately) in plant maintenance, fabrication, production, bolting, vehicle repair, and other applications where compressed air is the preferred power source. It has a four-way control valve for advancing, retracting, and holding a double-acting cylinder. It has an inlet air-pressure range of 25 to 125 psi and can start at low pressure.

Cycled less than 10 times then never used and still has rubber plugs attached! Comes with hose

Used over two day for emergency power to 2 ton rigging blocks so barely used, model # is not typo its an upgraded 5 liter industrial version usual retail $850-900US. Mint condition, pump will be shipped drained of oil.

  Gardner Bender CH1211 12 Ton K O Hydraulic Cylinder has a capacity of 12 tons with a 1.63-Inch strok

I have a hydraulic pump thats in great shape. used it on a couple of small jobs. I don't have any use for it now that I have a different career.