4 to 1 pulley for sale, brand-new and used.

Offering a low speed spindle pulley for an Rockwell Delta 15" drill press Pulley has some minor nicks on the edges 4 Step pulley, large OD is 7-1/2", small is 4-3/4" Any questions: e-mail lathemill@juno.com , or call 724 882 6449 I have many parts for drill presses, Delta, Clausing, Walker Turner Happy to combine shipping on multipl

single groove V-Belt bushed bore cast iron Pulley with bushing included: 7/8 in. keyed hub -- measures 3 3/4 in. across pulley-1 5/16 to 1 1/2 in.

single groove V-Belt bushed tapered bore cast iron Pulley with bushing included: 1 1/8 in. 'Taper Lock' keyed hub -- measures 4 3/8 in. across pulley-1 1/2 in.

double groove V-Belt bushed bore cast iron Pulley with bushing included: 1 1/4 in. keyed hub -- measures 5 3/8 in. across pulley-2 in.

This Sale Is For A Laboratory Surplus Robotics Twin Belt Idler Pulley Bearing Block Assembly Mount For Automation. The Pin At The Base Is 10mm In Diameter And At The Top 1/2" In Diameter. It Is About 2 5/8" Long From The Top Of The Clip To The Top Of The Shaft.

International buyers must pay their own local duties. We do not mark international parcels as gift. IF YOU HAVE QUESTIONS CALL 1-800-748-1945

International buyers must pay their own local duties. We do not mark international parcels as gift. IF YOU HAVE QUESTIONS CALL 1-800-748-1945

International buyers must pay their own local duties. We do not mark international parcels as gift. IF YOU HAVE QUESTIONS CALL 1-800-748-1945

International buyers must pay their own local duties. We do not mark international parcels as gift. IF YOU HAVE QUESTIONS CALL 1-800-748-1945

I believe this pulley is for a vintage Delta/Rockwell Drill Press but don’t know for certain, it may have other applications as well. (This is an estate find that was in a box with another pulley DP-725 that I am listing separately.) The pulley is in very good condition; I don’t see any cracks, bends, chipping or signs of significant wear. The pulley has a keyed bore approximately 17mm in diameter and has five steps of approximately 2-3/4”, 3-3/4”, 4-3/4”, 5-3/4” and 6-1/2”.

I believe this pulley is for a vintage Delta/Rockwell Drill Press but don’t know for certain, it may have other applications also. (This is an estate find that was in a box with another pulley DP-709 that I am listing separately.) The pulley is in very good condition; I don’t see any cracks, bends, chipping or signs of significant wear. The pulley has a keyed bore approximately 3/4 ” in diameter with two set screw holes.

Like many of us, I love to create and build neat solutions for problems that I encounter. This product that I've created allows you to take that old 3-13hp engine you have and repurposed it to something useful such as a generator. I’ve personally lived through hurricane Irene and Sandy with my homemade generator and let me tell you, It was great!

SquareTrade © AP6.0 Up to 4 New Porter Cable Portable Bandsaw Pulleys 844866 This is an Auction for up to 4 New Portable Band 6" Diameter Saw Pulleys, Model 844866.

YOU ARE LOOKING AT A NEW PAPER PULLEY PULLEY WAS MADE BY paper pulleys inc. 2"OD X 1 1/2" FACE WERE BELT RUNS X 5/8" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY QUESTIONS ARE NEED OTHER SIZE PULLEYS I HAVE MORE TO LIST,LET ME KNOW WHAT YOU NEED.THANKS FOR LOOKING.

YOU ARE LOOKING AT A NEW PAPER PULLEY THAT WILL START AT A VERY LOW PRICE.( THIS PULLEY IF YOU HAD ONE BUILT WOULD COST OVER $155.64 ) PULLEY WAS MADE BY paper pulleys inc. 5 1/2"OD X 7" FACE WERE BELT RUNS X 1 5/8" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY ?