4 to 1 pulley for sale, brand-new and used.

This is an extremely hard to find original cast iron flat belt pulley and mounting stub shaft for a 6hp John Deere E hit and miss gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind. The stub shaft is part number E2014R and the pulley has a 6 1/2 inch face and is 12 inches in diameter.

This is a real nice original cast iron pulley for an International Harvester 1 1/2-2 1/2 or 3-5hp LA or LB gas engine. It is part number 3591-D and is in excellent condition with no cracks, breaks, or repairs of any kind. It has a 5 inch face and is 4 3/4 inches in diameter.

This is a real nice original cast iron clutch pulley for a 2 1/2hp Mogul or 3hp Type M gas engine made by the International Harvester Company. It is in excellent condition with no cracks, breaks, or repairs of any kind except one repaired spoke on the carrier. A very nice job was done and it's very tough to notice especially when it's on an engine.

[ TB Wood's 1004C 4 Groove 10.40 In Outside Dia Cast Iron V-Belt Pulley

*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) STATES. ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE* ________________________________________________________________________________________________________________ Model: VIR140002 Condition: New Description: Winch - Commercial Duty Features: 120 V

This is a new never use

This auction is for the Alloy or Pot Metal pulley as pictured. It is the drive pulley for a 4" Jointer of unknown Brand or Make. It is about 2" diameter 1/2" bore About 1 1/8" Thick overall.

12' Pole Pruner by Corona w/Swivel Pulley,Cuts 1 1/4" Branches,Lightweight

Amico 1.5mm Pitch 10 Teeth 6mm Bore Motor Part Timing Belt Pulley Sprocket

CNC Engraving Machine Accessory 5M Timing Pulley Belt Set Kit Reducer Ratio 2:1 - Timing Pulley Sizes are 30teeth with 10 mm bore and 15 teeth with 6.35mm Bore- The Pulley width is 16mm- Belt Length is 300mm with 60 teeth - Belt Width is 15mmNOTES: - The small timing pulley is also available with a 6mm or 8mm bore size... leave a note when ordering if you want a different bore size... if you don't leave a buyers note you will receive a 15 tooth with 6.35mm Bore small pulley!!!

Amico Aluminum Alloy XL Type 50 Teeth 8mm Pilot Bore Timing Pulley

uxcell Silver Tone Aluminum Alloy XL Type 12 Teeth 6.2mm Pilot Bore Timing Pulley

Pulley removed from an old 30 gal. champion air compressor with a single stage pump and 3 hp motor Outer Diameter: 11"Bore size: 3/4"Bore depth: 1"Bore type: Fixed Not machined for key-ways or set screws Fan blade design, meant to provide cooling, will move a lot of air. ALUMINUM construction.

BELT DRIVE ALIGNMENT Fixturlaser PAT - the final solution to all your belt alignment needs! With the Fixturlaser PAT, you are never in doubt on whether your belt transmissions are aligned or not. By using the groove as reference, you will achieve a precise alignment which reduces belt wear, bearing failures and vibrations.