4 to 1 pulley for sale, brand-new and used.

Delta Milwaukee DP 220 drill press front pulley cover/guard. Included screw for attaching to your drill press. Has crack about 1 3/4" on the left side.

Dutton-Lainson StrongArm 120 Volt AC Powered Electric Winch with Remote Control — 4000-Lb. Capacity, Model# SA12015AC Product SummaryThis StrongArm® 120 Volt 4000-lb. capacity electric winch is designed for indoor use and for fixed applications with access to AC power.

You are buying ONE brand new pulley 60 tooth 0.20 XL pitch all aluminum pulley with 2 flanges, 2 set screws and 1/4" bore. We Can also provide this pulley with Metric BORES of 7 mm to 14 mm for $1 more, contact us. Pitch= 0.200XL two tenths inch pitch.

This is a brand-new Timing Belt Pulley XL 10 Tooth 6.35mm or 1/4" Aluminum Bore for 3D printer This Timing Belt Pulley XL 10 Tooth 6.35mm or 1/4" Aluminum Bore for 3D printer is used on the DNP linear motion sliders. It attaches to the DNP Cameras in Motion Pulley assembly. It is a 10 tooth pulley With a 6.35 mm (1.4") Bore which excepts a timing belt that is 3/8 inch wide with a 1/5 pitch pitch.

Sottof Sales Part removed from a Doall Model 1612-0 Vertical Bandsaw. Serial # 277-711034 Some parts from this machine fit other Doall models and sizes here is a link to the manual and parts list for this machine on the DoAll website to aide in confirming fit on your machine. http://www.doallsaws.com/manuals/1612-0_%20277.pdf Input pulley that goes on the gearbox.

FLEXCO Alligator Staple System, Belt Fastener, Conveyor Belt Lacing RS187J36/900NC 4 Sets of RS187 Joints for 36" Belts With pre-inserted staples and a one-piece strip design, Alligator® Ready Set™ makes splicing quick and easy.

Up for sale is a John Deehr Tractor Two Piece Pulley, please read and look at pictures as they are part of the description, this is a two piece pulley, I looked it up online, it's for a John Deehr Tractor, part number D2911R- JD, the part number and JD logo are on both halves, this pulley came from a Maytag Model-92 I purchased, it is a V-Belt pulley in great condition, not bent or dinged up, nice piece, it is 4 1/2" dia., 1 1/4" shaft hole and 11/16" wide, the hub is approx.

READ BEFORE BIDDING! I am selling this item as is even though IT WORKS because the wiring is old and I am not sure how well it will stay together. I cleaned it out the best I could, it looks like it was used to power a table saw because of the huge amounts of saw dust inside.

.STYLE3 {font-weight: bold}

TEKTON 5547 4-Ton Dual Gear Power Puller +Details Product Descriptions: Ratcheting gear pulley system allows for one handed effort to pull heavy loads Dual gears and locking pawls distribute pulling force evenly Hardened all-steel construction with corrosion-resistant galvanized finish

Offering a motor pulley for a Walker Turner or Rockwell Delta 20" drill press Good pulley, not worn out Large OD is 6-1/2", small OD is 2-1/2" Has 3/4" bore Any questions: e-mail, or call 724 882 6449

Mechanical advantage of Block and tackle system is about saving labor when dragging or hauling.

Up for sale is the pulley off an IHC LB engine. Fits the 1 1/2- 2 /12 hp LA and LB engines. Sorry I do not have the gib key.

 

Generic Rope Pulley Block and Tackle Hoist Product Description