4 to 1 pulley for sale, brand-new and used.

This unused conveyor drive pulley features Roll-Tech's innovative design which puts the hydraulic motor inside the conveyor pulley, saving space and parts. The roller is 4.5" in diameter by 12" long and is keyed for application of sprockets. The shafts protruding from the motor are 1.5" in diameter and terminate into a heavy duty stainless bearing assembly.

Genuine U.S. Military Issue Surplus   Dual Wheel Steel Pulley with Metal Bracket We do not see any casting numbers or markings on this item. :The overall size is 5 5/8" x 4 1/2" x 6 5/8" The wheels are 1 1/4" x 5 5/8" Diameter The grooves of the pulley wheels are 3/4" wide at the outer edge and tapers down to 1/4".

Up for bid is a 250' roll of 3/16"x 7X7 Wire Rope braided cable with clear plastic vinyl coating. There are two 3/16" wire rope clips and a 2"x 3/16" Stanley National pulley rated for 480lbs (218kg) and is lifetime lubricated. This item is in used but great condition.

Heavy Duty Lebus Double Pulley Snatch Block. Block is 9" x 6" and 4 1/2" thick Hook is is 7 1/2" x 7" Total Length is 23" long Sorry shipping is so high. This block weighs about 80 lbs.

start_elivehelp_btncode end_elivehelp_btncode *WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) STATES. ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE* ___________________________________________________________________________

Brass Pulley V Shaped Groove Overall Pulley Diameter: 2.5 inch Groove Overall Diameter: 1.7 inch Upper Section of Groove Width: .75 inch Middle Section Groove Width: .55 inch Inner most section Groove Width: .2 inch Shaft Diameter: .39 inch Pulley Height: 1 inch We will combine shipping for multiple items. Please email us with inquiries. Buyer pays shipping.

No 4186 We are a couple who are offering for sale items, from our recently closed Detroit area tool & die shop, after 30 plus years in the business, as well as surplus personal item from our recent divorce.

No 4185 We are a couple who are offering for sale items, from our recently closed Detroit area tool & die shop, after 30 plus years in the business, as well as surplus personal item from our recent divorce.

No 4184 We are a couple who are offering for sale items, from our recently closed Detroit area tool & die shop, after 30 plus years in the business, as well as surplus personal item from our recent divorce.

No 4161 We are a couple who are offering for sale items, from our recently closed Detroit area tool & die shop, after 30 plus years in the business, as well as surplus personal item from our recent divorce.

Offering a low speed spindle pulley for a Rockwell Delta 17" drill press In good condition Casting # DP-825 Large OD is 8-1/2", small is 4-3/4" Any questions: e-mail, or call 724 882 6449 I have many parts for drill presses, Delta, Clausing, Walker Turner Happy to combine shipping on multiple purchases

SOLID Aluminum with 1/2" thick steel plate base and steel bearing housing. Four inch spiral mandrel tapers from 3/4" to 3/16" pointed tip. Industrial quality machinery.

Knife Making: Belt Sander/grinder high quality Drive Wheel Assembly for 3/4" drive shaft Heavy Duty and build to last. Many of my recent customers expressed their interest in certain parts that they would likely use in their home-build belt sanders. Here we offer the proven d

The WW-650 12 Volt Package Deal. by: Wolfgang Engineering.

Head Stock Pulley #XL-1528-50 with Integral 32T Gear, Under Drive Pulley #A1505 with Drive Belts for XL Series 10" Sheldon Lathe with "E" Type Motor Drive Head stock pulley has 1 13/16" bore, 4 9/16" OD bull gear hub with good plunger holes, under drive is 3 9/16" OD with 7/8" keyed bore, both have 5/8" top width double grooves, minor wear, belts are Gates B-47 hi-power, look matched but cannot identify any match marks, some wear, no cracks or splits.

Motor Drive Pulley #A-1500 and Counter Shaft Pulley #E1514 for XL Series 10" Sheldon Lathe with "E" Type Motor Drive Motor pulley is 3 1/2" OD with 3/4" keyed bore, counter shaft pulley is 9" OD with 15/16" keyed bore, 1/2" top groove width on both, minor wear. No international, ask questions before bidding, always happy to combine shipping when possible.

This is a Vintage Large Heavy Pot Metal or Alloy Countershaft 4 step pulley 10-80 from a Vintage 12" Sears Craftsman Metal Lathe #101.07403 with a 2 3/4" gap between bed rails. Has wear and tear dust and dirt some nicks on edges but in good working condition. Has a 3/4" diameter bore with key slot.