4 to 3 reducer for sale, brand-new and used.

Up for sale is a LOT OF 4 BRAND NEW IN BAG Swagelok Stainless Steel Tube / Tubing ReducersSS-400-R-8 1/2" x 1/4" small stamp of Swagelok 316 on each fitting Please ask ANY and all questions before bidding - I describe every item to the best of my knowled

var itemNumber = window.ebayItemID ?

DODGE TIGEAR 2 RIGHT ANGLE WORM GEAR SPEED REDUCER PART # 35S30R RATIO 30:1 MAX TORQUE OUT: 3682 LBS-IN MAX HP IN: 4.15 HP THERMAL INPUT HP: 4.43 HP MECHANICAL OUTPUT HP: 3.41 HP INPUT RPM: 1750 OUTPUT RPM: 58 SERVICE FACTOR: 1.0 O

DODGE TIGEAR 2 RIGHT ANGLE WORM GEAR SPEED REDUCER PART # 35S25L RATIO 25:1 MAX TORQUE OUT: 3586 LBS-IN MAX HP IN: 4.72 HP THERMAL INPUT HP: 5.1 HP MECHANICAL OUTPUT HP: 3.98 HP INPUT RPM: 1750 OUTPUT RPM: 70 SERVICE FACTOR: 1.0 OVERHUNG LOAD CAPACITY: 2760 LBS OUTPUT DIRECTION: LEFT SEPAR

SHAMROCK PIPE TOOLS, inc. CHISEL JETTER NOZZLE. HAS 4 REAR JETTS, 4 FORWARD.

PENETRATER SUPER GERNADE RAM STYLE JETTER NOZZLE. Has 1 forward 5 Rear. All JETTS are good condition.MADE BY SHAMROCK PIPE TOOLS, inc.Not a cheap JETTER Nozzle, very high quality.I USED A REDUCER FITTING TO REDUCE IT DOWN TO 1/2 and it works great.

YOU WILL BE BIDDING ON A BOX LOT OF COPPER FITTINGS, 10 LBS. 63 PIECES IN ALL INDIVIDUAL SIZES FOLLOWING 1-TEE 1 1/4" X 1" X 1" 1-TEE 1 1/4" X 1 1/4" X 3/4"6-TEES 1" X 1"X 3/4"1-TEE 3/4" X 3/4" X 1/2"3-90 DEGREE ELBOWS 1 1/4"1-45 DEGREE ELBOW 1 1/4"3-90 DEGREE ELBOWS 1 "1-45 DEGREE ELBOW 1"5-90 DEGREE ELBOWS 3/4"1-45 DEGREE ELBOW 3/4"1-CAP 1 1/2"

TWO-STAGE, VENTED SINGLE SCREW 30MM EXTRUDER MODEL DJ-30 ELECTRICALLY HEATED, 32:1 LD, VENTED BARREL 7.5KW (10 HP) AC VECTOR MOTOR and DRIVE, 1500 RPM

BOSTON LUTFB-B AC BRAKE MOTOR 732-20-B9-J RIGHT ANGLE WORM GEAR REDUCER MOTOR: 208-230/460V 82.50 LOAD EFFICIENCY OVERALL LENGTH: 19.81" NEMA DESIGN CLASS B SERVICE FACTOR: 1.15 INSULATION CLASS B

BOSTON MOTOR / BOSTON GEAR REDUCER KUTF-B 2 HP 208-230/460V 6. 5-6 2/3.1 1725 RPM 145TC, 60 HZ, 3PH SERIES F 1.15 CODE K, DES. B RATING 40C AMB.

BOSTON BRAKE MOTOR AND RIGHT ANGLE GEAR REDUCER LUTF-B, F732-20-B9-G MOTOR: 208-230/460V 82.50 LOAD EFFICIENCY OVERALL LENGTH: 19.81" NEMA DESIGN CLASS B SERVICE FACTOR: 1.15 INSULATION CLASS B 1800 RPM RANGE

BOSTON RIGHT ANGLE GEAR REDUCER F721-20-B5-G SINGLE REDUCTION SHAFT ASSEMBLY CODE: G TORQUE CAPACITY (LB-IN): 754 BORE CODE: B5-56C MOTOR HP: 1 OUTPUT SHAFT DIAMETER: 1.25" MAXIMUM INPUT HORSEPOWER: 1.4 @ 1,750 RPM HP RATIO: 20:1 NEMA / IEC FRAME SIZE: 56C INPUT TYPE: C-FACE QUILLED OUTPUT TYPE: SOLID SHAFT OUTPUT DIRECTION: RIGHT INPUT SIZE: 5/8" OUTPUT SIZE: 1" CENTER DISTANCE: 2.06" MANUFACTURER REDUCER SIZE: 721 MAXIMUM OUTPUT RPM: 87.5 @ 1,750 RP

DAYTON SPEED REDUCER WORM GEAR GEARBOX MODEL NO.: 2Z934A 29:1 RATIO 5/8" BORE INPUT 1" SHAFT OUTPUT PLEASE NOTICE THAT ITEM HAS SOME SCUFFS, SCRATCHES, ETC. FROM LONG TIME STORAGE ON SUPPLY ROOM SHELF. FOR ADDITIONAL INFORMATION ON ITEM PLEASE SEE THE ABOVE PHOTOS.

BOSTON GEAR WORM GEAR SPEED REDUCER GEARBOX CAT.: F713-20-B5-H RATIO: 20:1 INPUT H.P.: .450 OUTPUT TORQUE: 264 LB. INCH APPROXIMATE 5/8" SHAFT DIAMETER APPROXIMATE 5/8" BORE FOR ADDITIONAL INFORMATION ON ITEM PLEASE SEE THE ABOVE PHOTOS. ITEM HAS SOME SCRATCHES, NICKS, SCUFFS, ETC.

GROVE GEAR FLEX-IN-LINE WORM GEAR SPEED REDUCER GEARBOX CAT.: S BAMCQ42-A INPUT HP: 4.04 MOTOR FRAME: 140TC RATIO: 25.6:1 1 1/2" APPROXIMATE SHAFT DIAMETER 7/8" APPROXIMATE BORE FOR ADDITIONAL INFORMATION ON ITEM PLEASE SEE THE ABOVE PHOTOS. ITEM HAS SOME SCRATCHES, NICKS, SCUFFS, ETC.