4.25 as a decimal for sale, brand-new and used.

Click to Enlarge Click to Enlarge

Buyer agrees to pay $22 JB JUST BETTER ATLAS 220LBS HVAC REFRIGERANT CHARGING SCALE  W/CASE

Victoreen 660-1 ion chamber type radiation detection and measurement system. Usable for gamma and x-rays. Internal battery or a/c powered.

Indexable Insert Drills; Drill Diameter (mm): 25.40; Drill Diameter (Decimal Inch): 1.0000; Drill Depth by Diameter Ratio: 3xD; Maximum Drill Depth (Decimal Inch): 3.0000; Shank Type: Universal; Shank Diameter (Decimal Inch): 1.2500 Drill Diameter (mm) 25.40 Drill Diameter (Decimal Inch) 1.0000 Drill Depth by Diameter Ratio 3xD Maximum Drill Depth (Decimal Inch)

Welcome to Select Machine Tool Item Desc

Very Light use List Style:3180 Material:High Speed Steel Shank:Straight w/ Square Tap Blank Construction:USCTI Table 311 Tap Chamfer:Taper Pipe Tap Construction:Medium Hook Taper Tap Style:

This is a Bison 3 Jaw chuck, 6.25" actual diameter. Through hole is 1.65", so you can get a 1 5/8" rod through the headstock. This is a quality chuck rated at 4500 RPM, which is double the speed rating of most cheaper chucks.

Up for sale is an Antique Vintage Bausch & Lomb Precision Refractometer Medical Instrument Device. Based on my research I believe this may be from the 1940's or 1950's....it's a fairly rare device from B & L. It's a HEAVY piece of equipment, it weighs approximately 25 pounds & the size is irregular but it's basic measurements are 21" x 15".

Mettler Toledo PM-30K High Capacity Balance, 32 Kg Range, 115V Seller's Description: Offered is a Mettle

Chatillon PBB-52KG Portable Beam Scale, 52 kg. This scale is used but has current state certification and calibration for trade. Used by local DOT for concrete specs.

Kennedy 526 Machinist’s Tool Chest - 8 Drawer

WILD HEERBRUGG N3 PRECISION LEVEL You can purchase it from us for $4,000 with FREE shipping! IF YOU ARE OUTSIDE OF THE UNITED STATES, PLEASE CONTACT US FOR SHIPPING COST. This Wild Heerbrugg N3 Precision Level is extremely accurate.

(2) Dixson BEW51A Series Bar Graph & DVM Industrial Displays 50 Scale TESTED Here is pair of Dixson BEW51A series bar graph & DVM industrial displays. They have been thoroughly tested by our engineer and are guaranteed to be in fine working order and

This is a USED Mitutoyo #186-901 25-piece radius gage set with the holder. The set ranges from 1/64" to 17/64" in 64th increments, and 9/32" to 1/2" by 32nd increments. The set also includes the 4" long holder to make it possible to check radii in confined or hard-to-reach locations.

This is a USED Starrett 167C 25-piece stainless steel radius gage set that includes the holder. The set ranges from 1/64" to 1/2" . This set is in good shape and would be a great but for anybody!