4.0 Ton 13.5 Seer Hi efficiency Match system R410A 13AJN48A01/RHLLHM4821JA with 10Kw Heater included Refrigerant:R-410A Suction Line Fitting 7/8" Liquid Line fitting 3/8" *Energy star rated
3.5 Ton 14 Seer Hi efficiency Match system R410A 13AJN42A01/RHLLHM4821JA with 10Kw Heater included Refrigerant:R-410A Suction Line Fitting 7/8" Liquid Line fitting 3/8" *Energy star rated
Avalance Photodetector, Model: APD120AS, 200 to 1000nm range. Three (3) of these photodetectors were purchased for an R&D project. One of the units was used for testing of an optical circuit.
This unit was used for demonstration has less than 10 hours use, very clean Cyclonic action separates the heavy dust particles from the fine particles and drops them into the 55-gallon steel drum. The fine dust travels past the 15-1/2" diameter impeller and is then trapped by a cartridge filter made of spun-bond polyester that filters 99.9% of particles from 0.2 to 2 microns in size.
This listing is for one Carlyle semi-hermetic compressor. This compressor is newly remanufactured. Our HVAC technician has checked it and pronounced it to be in good condition and ready to run.
MK Diamond 1503 Air Polisher MK Diamond's rear exhaust pneumatic polishing tool is designed for continuous production applications. Lightweight and compact, the MK-1503 Air Polisher is one of the most durable tools of its kind on the market for polishing stone. The water-tight sealed bearings provide long life and smooth rotational speeds.
Grieve Model 333 Large Capacity Electric Batch Oven You can easily convert this oven from 3 phase to to Single Phase Grieve Industrial helps people do that all the time if you are not handy at doing it yourself. Also, you can cheaply upgrade yourself to modern digital pid controls over mfg analog controls. Used industrial batch oven.
This machine machine is being sold from a working environment. It is in good, working condition. The saw is setup, powered and available for inspection.
AIRAID Modular Intake Tubes (MIT) provide a smooth air way to the throttle body that improves air flow up to an additional 400 CFM over restrictive stock intake tubes in order to give your engine more horsepower and torque. MITs are constructed from cross-linked, high-density polyethylene they are built each for a specific vehicle make and model and can be used to simply replace your stock air intake tube or can be added to an AIRAID Cold Air Dam QuickFit series system.
308 Base Mounted Compressor with Motor Same design as all the Q25 series pumps Must have been the model prior to the current 310 Quincy compressors are base load, continuous run units. Not aluminum high speed carry around units. This compressor would be easily capable of 150 PSI.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
