5 8 pulley for sale, brand-new and used.

DREAM. DESIGN. BUILD.

Please READ EVERYTHING BEFORE bidding. This auction is for; 1 - Congress Drives Division, Acme Precision Products, Inc. - Congress Standarized Pulley.

This is a 3" Pot Metal or alloy Motor Pulley with a 1/2" diameter bore takes 1/2" wide belts. It mounts with a set screw that is inside the pulley (under the belt) . The pulley is about 5/8 " thick.

This is a 3" Pot Metal or alloy Motor Pulley with a 5/8" diameter bore takes 1/2" wide belts. It mounts with a set screw and take 1/2" wide belts. It has an insert that can be inserted--the insert has a 6 sided "nut" opening 3/4" across internal.

This item is a vintage cast steel (aluminum?) motor pulley wheel. 5/8" thick, 1/2" diameter bore hole and 3" wide. Unstamped.

You are viewing a Browning 2AK25 pulley. This item is in good to very good condition. These sizes are approximate: 7/8 bore 3/16 keyway 2.5 inch diameter

You are bidding on (1) new in box T.B. Woods 3.35 diameter V-belt pulley/sheave #BK3234 ...... 3/4 shaft ....

Pre-owned Congress Tool & Die 4 Step 6-5-4-3 Pulley. ~1st step 3" ~2nd step 4" ~3rd step 5" ~4th step 6" Pulley has 5/8" bore that is keyed Comes with set screw Quality made in USA part! Check out my other items!

Genuine U.S. Military Issue Surplus   Dual Wheel Steel Pulley with Metal Bracket We do not see any casting numbers or markings on this item. :The overall size is 5 5/8" x 4 1/2" x 6 5/8" The wheels are 1 1/4" x 5 5/8" Diameter The grooves of the pulley wheels are 3/4" wide at the outer edge and tapers down to 1/4".

This is a new, old stock, cast iron V-Belt pulley. It measures 5.75 inches in diameter and the max belt width is 5/8. It has a tapered split bushing with it and the bore is 1 inch with a 1/4" wide key slot.

I HAVE PROVIDED PICTURES AND WILL GLADLY ANSWER ANY QUESTIONS. THIS WAS PURCAHSED NEW FOR A SINGLE PROJECT AND WAS NEVER ACTUALLY USED AND WAS STORED IN THE PROJECT TOOL TRAILER. THE KIT IS COMPLETE, EVERYTHING WORKS AND I HAVE PROVIDED THE INFORMATION BELOW.

No 4184 We are a couple who are offering for sale items, from our recently closed Detroit area tool & die shop, after 30 plus years in the business, as well as surplus personal item from our recent divorce.

Head Stock Pulley #XL-1528-50 with Integral 32T Gear, Under Drive Pulley #A1505 with Drive Belts for XL Series 10" Sheldon Lathe with "E" Type Motor Drive Head stock pulley has 1 13/16" bore, 4 9/16" OD bull gear hub with good plunger holes, under drive is 3 9/16" OD with 7/8" keyed bore, both have 5/8" top width double grooves, minor wear, belts are Gates B-47 hi-power, look matched but cannot identify any match marks, some wear, no cracks or splits.

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915 and 1916, Volume 2, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2008. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-371-3.

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.

Classic Archives Listing