Enduro Pro SM645-2P Energy saving, dependable and efficient Servo Motor for commercial sewing machines. These high torque motors result in better handling and increased production! 220 Volts 800 WATTS with Positioner Description: The super quiet Enduro™ Pro SM645-2P Servo Motor pays for itself with a remarkable 60% to 80% energy savings compared to clutch motors.
This motor pays for itself with the energy it saves! The super quiet Enduro™ Elite SM1000-2 Servo Motor pays for itself with a remarkable 60% to 80% energy savings compared to clutch motors. With the high and rising cost of electricity, you just can't afford to run a clutch motor any longer.
1 - 3.5" Diameter, 5/8" or 1/2" bore cast pulley. Perfect Pulley for 3L, 4L or A style belts. Each pulley has1 set screw and keyway (1/2" bore does not have a keyway).
1 - 8" Diameter, 5/8" bore cast pulley. Perfect Pulley for 3L, 4L or A style belts. Each pulley has1 set screw and keyway (1/2" bore does not have a keyway).
1 - 6" Diameter, 5/8" bore cast pulley. Perfect Pulley for 3L, 4L or A style belts. Each pulley has1 set screw and keyway (1/2" bore does not have a keyway).
1 - 4" Diameter, 5/8" bore cast pulley. Perfect Pulley for 3L, 4L or A style belts. Each pulley has1 set screw and keyway (1/2" bore does not have a keyway).
V-Belt Pulley Crankshaft From Man B18A/1 Oldtimer Tractor The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
CHAMPION AIR COMPRESSOR HR10-12 3PHASE 10HP COMPRESSOR WAS PURCHASED FROM AUTO REPAIR SHOP CLOSING DOORS 2 YEARS AGO. HAS BEEN TESTED THE ELECTRIC MOTOR IS PERFECT CONDITION ALONG WITH THE PUMP. TANK IS CLEAN AND SEALED TIGHT WITH NO LEAKS OR RUST.
This is a rather hard to find original cast iron pulley for a Fuller and Johnson hit and miss or throttle governed gas engine. It is in good used condition with no cracks, breaks, or repairs of any kind. It measures 8 inches in diameter with a 4 1/2 inch face.
This is a rather hard to find original cast iron pulley for a hit and miss or throttle governed gas engine. It is in good used condition with no cracks, breaks, or repairs of any kind. It measures 8 inches in diameter with a 4 1/2 inch face.
This auction is for one new old stock Auto Grace 6 hp., single cylinder, water cooled, Lister type diesel engine and accessories. I imported theengine from India in 2001 and it has been in storage. The engine has been uncrated but never started since I've owned it new.
This is a real nice original cast iron pulley for a York hit and miss or throttle governed gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind. It measures 12 inches in diameter with a 5 inch face.
Pulleys and Belting, by the staff of International Correspondence Schools, published by International Textbook Co., Scranton, PA, 1929, ICS # 2448, Edition 1. 5 1/2 x 8 1/2 softcover, 40 pages. Reprinted in 2011 by Nation Builder Books, Mebane, NC.
This listing is for a new Lister driving pulley 1.5" bore x 6.5" diameter, single belt. Commonly used as the alternator driving pulley on the crankshaft on Lister SL LD LR & SR engines, although many other applications would apply. If you are not sure whether this pulley is suitable for your engine please contact
YOU ARE LOOKING AT A NEW PAPER PULLEY PULLEY WAS MADE BY paper pulleys inc. 2"OD X 1 1/2" FACE WERE BELT RUNS X 5/8" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY QUESTIONS ARE NEED OTHER SIZE PULLEYS I HAVE MORE TO LIST,LET ME KNOW WHAT YOU NEED.THANKS FOR LOOKING.
YOU ARE LOOKING AT A NEW PAPER PULLEY THAT WILL START AT A VERY LOW PRICE.( THIS PULLEY IF YOU HAD ONE BUILT WOULD COST OVER $155.64 ) PULLEY WAS MADE BY paper pulleys inc. 5 1/2"OD X 7" FACE WERE BELT RUNS X 1 5/8" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY ?
YOU ARE LOOKING AT A NEW PAPER PULLEY PULLEY WAS MADE BY paper pulleys inc. 2"OD X 3" FACE WERE BELT RUNS X 3/4" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY QUESTIONS ARE NEED OTHER SIZE PULLEYS I HAVE MORE TO LIST,LET ME KNOW WHAT YOU NEED.THANKS FOR LOOKING.
This is a rather hard to find original drive pulley for a Pickering or other make of governor. These governors were commonly used on steam engines and some larger gas engines and tractors. It is in excellent used condition with no cracks, breaks, or repairs of any kind.
YOU ARE LOOKING AT A NEW PAPER PULLEY PULLEY WAS MADE BY paper pulleys inc. 2"OD X 3" FACE WERE BELT RUNS X 5/8" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY QUESTIONS ARE NEED OTHER SIZE PULLEYS I HAVE MORE TO LIST,LET ME KNOW WHAT YOU NEED.THANKS FOR LOOKING.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.