Model Gas Engine Clutch Fully Functional!! Modeled after a Stickney clutch, can be engaged while the engine is running, the engine must be stopped to disengaged. Will accept a 5/8" diameter shaft with a 3/16" keyway, with a socket head set screw over the keyway for easy installation.
Here is a used pressed paper 5" in diameter and 5 3/4" surface pulley. The center hole is 1 1/8". It has 2 holes in the surface that looked to be drilled.
Here is an original belt pulley that fits a 2-1/2hp IHC Famous or Titan Horizontal hopper cooled engine or a 3hp Vertical IHC Famous or Titan. There are NO cracks, breaks, or welds. Check out the pictures and see if you need it.
This is a nice alloy or pot metal 2 step pulley Wear and tear and dust and dirt & nicks but in Good working good condition. Has a 1/2" Bore Mounts with a set screw.takes 1/2" wide belts pulley about 1 1/4" thick. Local Pick-up Available.
Cast iron pulley with a chip on one side. 4 1/8" diameter, 4 3/4" overall diameter, 3 1/8" face. Fit on 1 1/8" shaft with 5/16" wide key way that 9/16" deep.
This is a Light Alloy or Aluminum pulley from a Ferhoth Belt or disc Sander Some dust and dirt but In very Good working shape. It has a Bore ABOUT 5/8" ==Metric equivalent?? mounts with a set screw.
Pulley removed from an old 30 gal. champion air compressor with a single stage pump and 3 hp motor Outer Diameter: 11"Bore size: 3/4"Bore depth: 1"Bore type: Fixed Not machined for key-ways or set screws Fan blade design, meant to provide cooling, will move a lot of air. ALUMINUM construction.
Hello Folks, Today we have 1 double pulley with a 3/8" wide belt, 5 1/2" and 2 1/8" diameter, part # RB-153. Also in this lot are 2 bronze and flanged bushings part # R-368. The last item is drive wheel shaft, part # WS-11, 5/8" diameter x 3 3/8" long.
Hello Folks, Today we have 1 double pulley with a 3/8" wide belt, 5 1/2" and 2 1/8" diameter, part # RB-153. Also in this lot are 2 bronze and flanged bushings part # R-368. The last item is drive wheel shaft, part # WS-11, 5/8" diameter x 3 3/8" long.
Black anodized, 3-7/8 dia x 2-5/8 long pulley. Grooved for 5M belt. 12 hole bolt pattern to fit Model 4B Professional Instruments Model 4B air bearing.
You get five of these BROWNING 2 groove pulleys for this listing. The units are new but the boxes are shelf worn. Browning (Regal) 2AK56H 2AK56H, Bushing Bore V-Belt Pulley, Section Size: 3L, 4L, A, Grooves: 2, Pulley Material: Cast iron
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.