Selling a new-in-box General Electric 5KH32HN5461T 1/3 hp, 1725 rpm, 48Y frame, single phase, 115 volt motor. Carrier Bryant number P267-9308. Shaft is 1/2" x 1.5".
Selling a new in box General Electric 1/4 hp ac motor, 1725 rpm, 115 volt, 48Y frame, single phase. Shaft is 1/2" x 1.5". Carrier Bryant number P267-9305
New electric Motor, single phase 115/230 volts Hp : 1 Volts: 115/230 single phase Hz : 60 RPM : 1725 Amps : 13,6 / 6,8 Frame : 56C Staft : 5/8 inch Waranty : 1 year This Motor is built with a thermal protection relay include in the connexion box!! It Also include the C-face as you can see on the picture.
BALDOR ELECTRIC 1/4 HP SINGLE PHASE AC MOTOR 115/230 VAC MODEL KL3403 a.imagelink {color:#8282fb;} a:hover.imagelink {color:#8282fb;} a:visited.imagelink {color:#0070f3;} a.imagelink img.auctionimage { b
This is a strong running Heavy electric motor from a Vintage Shopsmith 10-E Dust and dirt wear and tear rust and pitting but in good working condition. 1/2 Horsepower single phase 1725 RPM 120 Volt 7 amp 60 cycle. Has a 5/8" diameter shaft with key slot about 2" long overall.
1/2 horse power industrial motor by Baldor - 1750 rpm - frame 56 - single phase and you can change the voltage from 115 to 208, or 230 volts - reversible too, can spin either direction - has a 115 VAC grounded plug - shaft diameter is 5/8 inches - keyed. -- 14 day warranty -- Be sure to check all the specs before you buy to make sure this will work for your application.
Tested and working GE A.C MotorModel 27468Type: SAFrame 147Form DBVolts 110Amps 5.41/4 horsepowerspeed 1725single phaseOver 15 feet of power cord new_dfb_templateend_display_feedback_code_window
This is a Heavy Very Very nice Baldor Motor Made in the USA LIGHTLY USED from a Wood Lathe. Retails new for over $300 Some dust and dirt wear and tear scratches but In good working shape. It has a 5/8" diameter keyed shaft @ 1 3/4" Long with key and an on/off switch.
This is a Heavy nice Baldor Motor Made in the USA USED from a Wood Lathe. Some dust and dirt wear and tear scratches but In good working shape.Some wear on shaft but very usable It has a 5/8" diameter keyed shaft @ 2 1/2" Long overall 1 7/8" with key slot Has an on/off switch.Is reversible currently wired Clockwise (right handed) at shaft end. The motor is single phase 1725 RPM Dual Voltage 115/230 wired 115 curr
This is a Vintage Strong running 1/4 Horsepower General Electric motor from a Wood Lathe. Comes as pictured with an on/off switch mounting bracket and clips and Bolts as pictured. Has a 1/2" diameter shaft flat sided about 1 3/4" long 1/4 Horsepower 115 Volt 60 Hz 1725 RPM 5.6 amp single phase Reversible Currently wired clockwise (Right handed at shaft end).
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
