5/16 x 3 1/2 bolt for sale, brand-new and used.

Very Nice - Original rocker type tool post tool holder with wrench for an Atlas 10" or Craftsman 12" lathe. Tool post base measures 1 1/2" x 1" x 5/16". Stands 3 1/2" to the shoulder.

Enco 12 position turret tool holder for metal lathes. 3-1/2" square. Slot is 11/16" high X 1/2" in.

ANTIQUE VALVE STEM SEAT CUTTER JIG, 3V-1A VERSATILE TOOL HOLDER CLAMP STEEL VISE FILE HOLDER / ROD HOLDER / SHAFT HOLDER PIPE HOLDER / TUBE HOLDER JIG, 3V-1A HANDTOOL Used and in very good condition. This antique tool was originally made as a Valve Stem Seat Cutter, Model 3V-1A (make unknown). It is also a very Versatile Steel Vise / Clamp Tool Holder / File Holder / Rod Holder / Tube Holder / Pipe Holder / Shaft Holder Jig Handtool.

6pc Lot.T-Slot Bolt 1/2"-13 x 3-1/2" LengthNo original packaging. Un-used surplus inventory. Some minor dings on parts from handling.

New And Used Clamps (See Photos)4pc Lot - 1/2" Tapped Plain End Clamp - Tapered Nose3/4"H x 1-1/2"W x 5"LFor Use With 1/2" or 12mm Bolt/StudTap Size: 1/2"-131-1/32" Travel5/8" Centerline of Slot to Nose7/16" End to Hole CenterFinish: Black Oxide L017

This is a heavy duty clamp for use on a milling machine table. It is missing the wedge but comes with mounting bolt and tee nut. The main body is 5 1/4" tall and has a capacity of 3".

1-used metal lathe face plate. 8-1/2" in diameter, 11/16" thick with a 1-3/8" threaded center with 8 threads per inch (TPI) There are 4 oblong holes that extend completely through the plate and that are centered around the center hole and the long axis of the holes radiate from about 1-3/4" from the center to 3-3/4' from the center. They are 1 - 15/16" long by 1/2" wide.

LATHE,MILLING 12" HEAVY DUTY FACE PLATE 1-5/16 THROUGH HOLE , WITH [4 ] .556 X 3-1/8" LONG SLOT FOR 1/2" DIA BOLT . CAN BE USED FOR LATHE OR MILLING MACHINE

Aluminum Angle 3/4 x 3/4 x 24 in, 1/16 in thick Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed. They are slightly less than a 1/16 of an inch thick.

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

Okuma Lathe Tool Block (Inv.29403) Bolt Pattern Roughly 4 3/16 x 2 3/4" Overall dimensions 6 x 4 1/2 x 5 1/2" Loc. V18-0 (Inv.29403-29407) Not What You Were Looking For? Check out our eBay Store!

RIGHT ANGLE PLATE FOR MACHINIST ROTARY TABLE 2-5/8" DIA THRU HOLE & (4) 5/16 BOLT HOLES ON FACE (2) 5/16 BOLT HOLES AND (2) .530 X 1" SLOTS ON BASE IN GOOD CONDITION OVERALL DIMENSIONS: 7-3/8" W X 6-7/8" D X 9" H APPROXIMATE SHIPPING WEIGHT: 25 LBS WE SHIP UPS OR USPS FLAT RATE WHEN AVAILABLE

Machinist or Toolmakers Sine Plate (Bar) 6" long x 2 7/8" wide x 1 3/4" highest point, V groove at front end. Has 3- 5/8" dia. clear holes on base along with 4- 3/16" threaded work bolt holes and 19-1/4" dia.

Item ....................... Some type of slide tool perhaps for mounting in a vise? Manufacturer .......

T-SLOT BOLT CONDITION = NEW T-SLOT BOLT MANUFACTURER = J.H. WILLIAMS (USA) THESE HAVE BEEN WAREHOUSED IT LOOKS LIKE FOR MANY MANY YEARS, AND THERE IS SOME RUST BUT THEY ARE NEW UNUSED THIS ITEM IS A HEAVY DUTY T-SLOT BOLT 4140 STEEL, BLACK OXIDE FINISH, THREAD CLASS 2A THREAD SIZE = 3/8-16 LENGTH UNDER HEAD =5.330" HEAD DIMENSIONS = .750" WI

T-SLOT BOLT CONDITION = NEW T-SLOT BOLT MANUFACTURER = J.H. WILLIAMS (USA) THESE HAVE BEEN WAREHOUSED IT LOOKS LIKE FOR MANY MANY YEARS, AND THERE IS SOME RUST BUT THEY ARE NEW UNUSED THIS ITEM IS A HEAVY DUTY T-SLOT BOLT 4140 STEEL, BLACK OXIDE FINISH, THREAD CLASS 2A THREAD SIZE = 3/8-16 LENGTH UNDER HEAD = 1-5/8" HEAD DIMENSIONS = .740" WIDE AS

BIG 2-PIECE HAKHOREI / HAKHORET METAL WORKS VISE Heavy-Duty, Industrial-Grade MILLING MACHINE VISE/VICE STEEL MACHINIST VISE TOOL CAUTION: MANY VISES SOLD ONLINE DON'T WORK OR WORK POORLY OR ARE RUSTED OUT IN AREAS THAT THEIR SELLERS DON'T PROVIDE IMAGES OR DETAILED DESCRIPTIONS FOR - WE TEST ALL OF OUR VISES AND THEY WORK FINE, AND WE PROVIDE IMAGES OF ALL SIDES AND DETAILED DESCRIPTIONS - MAKE SURE YOU SEE IMAGES OF ALL SIDES AND DETAILED DESCRIPTIONS BEFORE BUYING OR BIDDING.

Self-centering, extra-wide opening jaws open a full 9-Inch (228.6mm) and hold heavier objects by centering weight over base Parts Tray Base Mount adds stability [8.5 (215.9mm) diameter] and has six individual trays to neatly hold small parts and tools Ribbed, neoprene jaw pads are 1.875 (47.6mm) high x 1.5 (38.1mm) wide and provide a sure grip Height: 7.875 (200mm), Weight: 5.0 lbs. (2.3kg) Product Description PanaVise is a major manufacture of Vises and Work Holding Tools.

#MobilePhoneTemplate { display: none; } @media screen and (max-width: 640px) { #MobilePhoneTemplate { display: block ;//!important } #mobilefooter { display: block !important; } #Template { display: none; } .showbtn { display: block; } } #showbtnm, #mobilefooter { display: none; } .showbtn { background: none repeat scroll 0 0 red;