Description: Provides a running torque of 70 lb·in (8 N·m) Power on – running 150 seconds for 90° of rotation Power Off Spring Return in <25 seconds Power Requirement: 24VAC/VDC VA rating:8.0 0(2) to 10VDC, 0(4) to 20 mA (w/ 500 ohm Resistor) Electrical connection: 48" 19 AWG Plenum Cable; 1/2" Conduit Connectors Control Signal: Proportional 0(2) to 10VDC; 0(4) to 20 mA; Torque: 70 lb-in; Product Specifications Control Signal Proportional 0(2) to 10
HP 3456A 6.5 Digit Digital Voltmeter Test Results: Measured AC line voltage - FAILED Measured ~500 Ohm resistor - ok Measured ~10 VDC - ok Has scuffs, scrapes, stickers and sticker residue. May need calibration after repair. Does not include power supply, leads, or power cord.
This is a +/-15V bipolar power supply "kit" suitable for audio applications including the Precision MS Matrix, Stereo Width Controller, Dual Class-A Headphone Amplifier or any application where low-noise bipolar supplies are needed. The measured noise performance of this supply is far better than the specifications suggest with typical ripple <10mV within the audio band. It has been tested with both the Precision MS Matrix and Dual-Class A Headphone Amplifier.
This is a USED but completely functional unit that was removed during a recent upgrade. TEC2647-2 with 2 outputs, can be used as a standalone to control an on/off, floating, or proportional 0-10vdc (0-20ma with separate 500 ohm resistor) device. This thermostat can also be tied into a Building Automation System that communicates BACnet MS/TP Several available, please contact if interested for special group pricing..
Buyer will receive 4,500+ pcs of Resistor RES-02916, manufacturer's part number RES-02916 . These are new parts manufactured by Zyrel. Please read all label information to be sure to get the correct part for your application.
Buyer will receive 2,500 pcs of Resistor RES-03142-LF, manufacturer's part number RSMF 2 51 5% R . These are new parts manufactured by SEI. Please read all label information to be sure to get the correct part for your application.
High voltage resistor 500 Meg 1% (F) in a rubber compound in a white plastic box with two mounting hole in tabs. Marked "RA 15F507". Excluding the mounting tabs: 4" x 1" x 3/4" These contain one KDI-Pyrofilm PVC300 500Mohm 1% resistor, which is rated in open air at 3.75 Watt 30 Kilovolt.
BI TECHNOLOGIES VARIABLE RESISTOR PART # 62-55-4 NATIONAL STOCK # 5905-00-415-4138 ( 311-0634-00 ) CONDITION IS NEW SURPLUS NEW OLDER STOCK 500 OHM PAYPAL FOR PAYMENTS ONLY WE SELL AND SHIP TO THE CONTINENTAL USA ONLY IF YOU INTEND TO EXPORT THIS ITEM YOU ARE RESPONSIBLE FOR ALL EXPORT RULES AND REGULATIONS DOMESTIC AND FOREIGN.
Description Note: This product is a DIY Kits, buyers need to own welding. DIY risk, novice buy carefully, If it is man-made damage, we do not assume responsibility, Thank you for understanding. Assembly Tutorial Website: http://blog.163.com/jinyong3771912@126/blog/static/760962792015317322669/
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.