ebay template // //form tags to omit in NS6+: var omitformtags=["input", "textarea", "select"] omitformtags=omitformtags.join("|") function disableselect(e){ if (omitformtags.indexOf(e.target.tagName.toLowerCase())==-1) return false } function reEnable(){ return true } if (typeof document.onselectstart!="undefined") document.onselectstart=new Function ("return false") else{ document.onmousedown=disableselect document.onmouseup=reEnable }
Tektronix DM5110 Programmable Autoranging DMM When the Instrument ID button is pressed, nothing happens so there is an issue with this function. Missing the pull tab, but it can be removed from the rack with a little wiggling. Tested ~20VDC ok Tested ~120VAC ok Tested ~500 Ohm Resistor ok Tested ~20mA DC ok
New in box never used Honeywell MS7520A2007. Product Specifications ApplicationHVACDimensions (in.)9.72 in high x 3.94 in wide x 2.95 in deepDimensions (mm)247 mm high x 100 mm
Description: Provides a running torque of 70 lb·in (8 N·m) Power on – running 150 seconds for 90° of rotation Power Off Spring Return in <25 seconds Power Requirement: 24VAC/VDC VA rating:8.0 0(2) to 10VDC, 0(4) to 20 mA (w/ 500 ohm Resistor) Electrical connection: 48" 19 AWG Plenum Cable; 1/2" Conduit Connectors Control Signal: Proportional 0(2) to 10VDC; 0(4) to 20 mA; Torque: 70 lb-in; Product Specifications Control Signal Proportional 0(2) to 10
The GK-plus4 ULTIMATE FULL FEATURED Arduino compatible DIY Geiger Counter Kit number 115 by Atomic.dave This is the fourth model in the GK-plus series of meters, this time with LND712 FEATURES: Internal Alpha Beta Gamma Xray sensitive Am
This is a new unused 2 milliwatt Helium Neon Laser Kit The kit is complete and contains the following items: 1) Melles Griot Part #: 05-LHP-122 Laser Tube (see specifications below) 1) Melles Griot Part #: 05-PSAB-804-045 Laser Power Supply (see specs blow) 1) 5 Watt 75K ohm ballast resistor 1) Anode clip for laser tube 1) 15Vdc 1.0A Wall adapter 1) 2.1mm female power connector for 15Vdc power supply Soldering and mounting is recommended.
HP 3456A 6.5 Digit Digital Voltmeter Test Results: Measured AC line voltage - FAILED Measured ~500 Ohm resistor - ok Measured ~10 VDC - ok Has scuffs, scrapes, stickers and sticker residue. May need calibration after repair. Does not include power supply, leads, or power cord.
This is a +/-15V bipolar power supply "kit" suitable for audio applications including the Precision MS Matrix, Stereo Width Controller, Dual Class-A Headphone Amplifier or any application where low-noise bipolar supplies are needed. The measured noise performance of this supply is far better than the specifications suggest with typical ripple <10mV within the audio band. It has been tested with both the Precision MS Matrix and Dual-Class A Headphone Amplifier.
This is a USED but completely functional unit that was removed during a recent upgrade. TEC2647-2 with 2 outputs, can be used as a standalone to control an on/off, floating, or proportional 0-10vdc (0-20ma with separate 500 ohm resistor) device. This thermostat can also be tied into a Building Automation System that communicates BACnet MS/TP Several available, please contact if interested for special group pricing..
National Instruments NI PXI-4060 5-1/2 Digital Digital Multimeter Card Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from National Instruments and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
Being listed for your consideration is this very nice Eico 950B capacitance, resistance bridge. It’s been tested and works on all ranges with reasonable accuracy. It has a nice bright eye tube indicator.
This is a used Resistor, but every thing seems to work just fine. The wiper make contact all the way on it's travel. Full reading on my meter was 499@2K.
The abyx-Gk5 CUSTOM FULL FEATURED Arduino compatible DIY Geiger Counter Kit 123 by Atomic.dave FEATURES: Internal Alpha Beta Gamma Xray ULTRA-Sensitive American made LND7317 Pancake tube with Ludlum 44-9
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
