56-45 for sale, brand-new and used.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Now with Knurled nuts! Hi, up for sale is one lot of 5 sets of 1-1/8 inch O.D., aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16", and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These will fit small holed flanges, like Duct work Etc., and pipe up to 12" on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. Even 1/2" pipe has 5/8" holes, so these will fit 1/2" pipe up to 12" pipe on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes fro1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Antique Norton 1945 Diamond Wheels and Hones Brochure VFC with List Prices

Products Size: Thickness:12mm Width:15mm Length:500mm

Products Size: Thickness:8mm Width:25mm Length:500mm

Products Size: Thickness:5mm Width:20mm Length:500mm

BT 45 Flange - 3/8" End Mill Holder Made of alloy forged steel for long, durable service life. Hardened to RC 52-56 and ground to ensure maximum accuracy. End Mill Socket T.I.R.

You are bidding on a Brand new in the Tube, Parlec HSK 63- .500 Shrink Fit End Mill Holder, No. H63E50SF315. Heat shrink holders provide the best solution for High Speed Machining.

SHARS 5/8" Keyless drill chuck with Morse Taper 4 Integral Shank 13mm --THIS UNIT DOES NOT CLOSE DOWN TO ZERO-- -- PLEASE REVIEW CAPACITY BEFORE PURCHASE-- Product Code 202-5095A Product description Capacity: 3/32-5/8" Shank Type: Morse Taper 4 Runout: .002" Tang type Product features

SHARS 5/8" Keyless drill chuck with Morse Taper 3 Integral Shank 13mm --THIS UNIT DOES NOT CLOSE DOWN TO ZERO-- -- PLEASE REVIEW CAPACITY BEFORE PURCHASE-- 202-5094A Product description Capacity: 3/32-5/8" Shank Type: Morse Taper 3 Runout: .002" Tang type Product application Integral sha

HARDINGE #10 COLLETS FOR USE IN SCREW MACHINES 23/64" Round Collet NEW OLD STOCK APPROXIMATE SHIPPING WEIGHT: 2 LBS WE SHIP UPS OR USPS FLAT RATE WHEN AVAILABLE FOR ANY QUESTIONS CONTACT GERRY VIA EMAIL OR 727-547-0616. BUYER PAYS ACTUAL SHIPPING FROM 33782. LOCAL INSPECTIONS AND PICKUPS WELCOME.

Autoclave Engineers 30VM9071-WO, High Pressure Valve, 30,000 PSI...9/16". Used, in good condition, has some scuff marks from storage (as seen in pictures). High Pressure Valve Features: Rising stem/barstock body design.