6 flange adapter for sale, brand-new and used.

I have 1-PAIR ((2 HEADS)) new old stock Whelen LED tir6 LED heads. These are one of Whelen's brightest heads available and I'd be willing to say the absolute brightest out there! The actual model # is 50CR3ZCR.

2 grinding wheels from 3M Scotch Brite. The one in the package is marked 6" x 1/2" x 1" grade - 2A Medium EXL Unitized Wheel. Unsure if that is the correct one for the package or not as it has been removed from the package.

About us Shipping Payment

Two (2) Mueller CC25 tapping machines with 25" travel. They were recently rebuilt and come with the following: One 3.5" with hub and cutter One 4" with hub and cutter Six 8" (2 newly sharpened) Eight 6" with hubs and cutters One 10" with hubs and cutters One 12" with hubs and cutters Flange Pipe Adapters 3"-12" One 6" MJ adapter Ten extra hubs Will only be sold as a set...no splitting up.

This 4 pc set is now being offered with our PREMIUM X-BARS. Note regarding fit: Measure your inside, front to back, bed gap. These 4 bars are intended for stand alone use on 20 ton (or less) presses with, front to back, gap of about 4.25 inches.

Jacobs ISO 529/ 2283 Type Tapping Collet- System #2, Tap Size M14 With 11.2 MM Tap Shank And 9.0 MM Drive Square Technical Detailsm Model # TC820M14 Part # 65164 Quick Change Style With overload clutch Product Description From the Manufacturer This Jacobs ISO 529/2283 Tap Collet with overload clutch has a Tap Size #2 of M14 with a

BILZ TENSION COMPRESSION TAP CHUCK USES SIZE #1 ADAPTERS 6" PROJECTION FROM BACK OF FLANGE Good used condition. Cat 40 adapter included. Payment due within 48 hours of purchase.

PARLEC ROUGH BORING HEAD PART NO. PC4-4405 PARLEC CAT 50 ADAPTER ADAPTER PART NO. C50-KA4-6 APPROX.

ATS - A6-S22H Pull Back Collet Chuck S Style W/ Master Collet

BUCK CHUCK Lathe Chuck Adapter Back Plate Mfr. Number: A10-D6 Chuck Diameter Compatibility: 10" Spindle Nose Type: D Series Through Hole Diameter: 3.250" Inside Diameter: 7.858" Outside Diameter: 10" Flange Height: 0.985" Mount: D1-6 Material: Steel Specifications: Ajust Tru(R) Lathe Chucks FREE SHIPPING!

Item No. 317 - 0006 Truck shipping only. Specifications: Center height: 6.29 ( 160 mm ) Swivel angle of spindle from horizontal position ( upward ) < 95 degree Horizontal position ( downward ) < 5 degree Rotating angel of spindle for one complete revolution of diving handle 9 degree ( 540 grad.

Boy Machine 50M Spare Parts New Manufacturer: Various

Beckman Centrifuge Rotor SW 50.1 50k rpm 30ml 6x5 Class A, B, C, D, F, G, H, Q, R, S

ColdEdge Technologies Displex CH-204 UHV 10K Closed Cycle Cryocooler System including cold head, HC-4 water-cooled compressor, 10-foot gas line set and cold head power cable, manual, and tools The system operates at 208 VAC/60 Hz or 200 VAC/50 Hz and can be configured for other voltages. The cold head includes a 6-inch conflat adapter flange that can be easily removed. This adapter eliminated all rubber O-rings and provides two mini-conflat ports and one 0.25” VCR port.

include("http://www.kdwebhostingdesign.com/eBay_H

Our Other Auctions Add Us to Your Fav. Sellers &

This listing is for a large group of 1-1/2 inch copper pipe and fittings. These are new old stock and are unused unless noted. They have never been used and are ready for the next job unless noted.