625 250 for sale, brand-new and used.

SquareTrade © AP6.0 UP TO 4 THOMSON 1 1/4" OPEN PRECISION BALL BUSHING BEARINGS OPN203242 -FREE SHIP This is a Fixed Auction for up to 4 New in the Box, Thomson 1 1/4" Precision Open Steel Ball Bushing Bearings, No.OPN203242.

UP TO 2 NEW THOMSON 1 1/4" PRECISION BALL BEARINGS Super 20 OPN FREE SHIP This is a Fixed Auction for up to 2 New in the Box, Thomson Precision 1.250" Super Ball Bushing Bearings, No. Super 20- NEW COST $145. PLEASE NOTE -- Each Bid is for ONE Bearing..

This is a brass on stell rack and pinion. The pinion has a 1.625" diameter and a 0.100" pitch or lead. The pinion bore is 0.250" and has a clamp.

This is a new, NEW BEI INDUSTRIAL ENCODER MODEL HS25F-62-R10-BS-250-ABZC-7272-SM12-S PART # 924-01072-224 CUST # OEHS25A27 MODEL # HS25F HS = Hollow Shaft 25 = 2.5” Encoder Diameter HOUSING CONFIG: F = Standard&nb

For sale is (2) Pittman 30.3 volt DC motors. The shaft is .250 diameter and the over all length of the motor is 4.625 inches, minus the shaft. The shaft length and is .875 long and the pilot diameter is 1.00 inch These motors are new and were never used.

Electro-Craft .625 diameter shaft .250 diameter on other end.Spins free know idea if it is good or bad.

AIRPAX 1/2 amp CIRCUIT BREAKER 250 VAC Delay 61F #UPGH11-1-61F-501-91 (AM-4)

Elinco CB247 Permanent Magnet D. C. Generator Specifications: Part: CB247 / Alt.

Payment Policy Brand New Sony CyberShot 8 MP Di

Model: D2425 Item specifications: BrandCrydom

THIS LISTING IS FOR 5 PCS! IF YOU NEED ONLY ONE PLEASE DO NOT HESITATE TO MESSAGE ME.

TORK - 1101-O Electromechanical Timer Can be used as *Paragon 4001-00 Replacement* Scheduling: 24 Hour Special Features: SPST 24 Hour Time Switch - Same Day On-Off Times Each Day

The item available here is a used R + W TORQUE LIMITER WITH CLAMPING HUB that appears to be in EXCELLENT CONDITION. This item has not been tested and it comes with a 14 day return policy from the date the item was shipped, EXCEPT INTERNATIONAL SHIPPING. Postage is not covered.

OUTPUT SHAFT 5/8" (0.625") x 2 1/4" (2.250") LENGTH with 3/16" (0.187") keyway RPM: 1725 MAX. SAFE RPM: 5500 FRAME: ED56C ENCL.: TENV INSL: F TYPE: TPR CONT. DUTY FORM FACTOR: 1.50 60Hz VOLTS: 90 AMPS: 2.80 MAX PEAK AMP: 31

This auction is for a used but excellent condition Bodine Gear Motor. It measures 9.250" long 6" wide and 7" high. It is 115 volt 173 RPM and a 10 to 1 ratio.

SEE WINSMITH PDF FOR COMPLETE SPECS. D90 TYPE SE MAX INPUT @ 1750 RPM: 0.118 HP OUTPUT TORQUE: 607 lb.inch SF: 1.0 INPUT BORE INSIDE DIAMETER 5/8" (625") with 3/16" (0.187") keyway OUTPUT SHAFT DIAMETER 1.00" with 1/4" (0.250") keyway

Product Detail

Included are (2) new hubs, and (1) new Lovejoy S-Flex coupling size 7 retail cost of $128.30 Bore Diameter: 1-5/8" Flange Diameter: 4-5/8" Length Through Bore: 1.84" Coupling Size Code: 7 Bore Type: Finished with Keyway Hub Type: Spacer Flange Hub Flange Type Code: S Hub Material: Cast Iron Coupling Overall Length: 3.94" Hub End Outside Diameter: 2.81" Torque Capacity: 2875 (Hytrel) in·lb, 725 (EPDM & Neoprene) in·lb Maximum RPM: 5,250 RPM Horsepower

LARK ENGINEERING CO., ATTENUATOR,VARIABLE MODEL MT-511 NSN 5985-00-476-8271 US ARMY P/N10658397 NOS CONDITION. NOT USED. 14 DAY WARRANTY FOR COMPLETE REFUND.

DESCRIPTION