7 8 pipe for sale, brand-new and used.

Hi, up for sale is 5 sets of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 2" long, with knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 5 sets of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 2" long, with knurled nuts.

Hi, up for sale is 5 sets of Mini, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong. These have a 45 degree taper with 1/4"-20 removable threads, 2" long, with knurled nuts.

Now with Knurled nuts! Hi, up for sale is one lot of 5 sets of 1-1/8 inch O.D., aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16", and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These will fit small holed flanges, like Duct work Etc., and pipe up to 12" on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. Even 1/2" pipe has 5/8" holes, so these will fit 1/2" pipe up to 12" pipe on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes fro1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

This machine is in fantastic shape and has been greatly taken care of. If you have any questions please feel free to contact me anytime. DIES ARE INCLUDED!

In High Frequency Welding of tube and pipe, the vee angle affects the weld quality very much. However, people have not had a professional instrument to measure it. So, I have developed a Vee Gauge, as shown in the attached photo.

For your consideration is a Lot of 10 black round plastic fence/tube/pole/pipe caps. These round caps are made to fit inside a round tube/pole that has a 1 7/8" inside diameter. The top of the black cap has a diameter measuring just a hair over 2 1/4" They have a cross section webbing inside the cap for strength.

#4 Morse Taper 3/8" pipe thread hand tap - 0.7" diameter shaft with 0.531" square Overall diameter ~1.25" Shipping: Winner pays actual shipping cost. There is NO

No 4213 Retired Machinist/Toolmaker with 40+ years in the tra

1pcs 2.2KW 3hp 220V water cooled wood spindle motor+80mm spindle Bracket+13pcs ER20 collet+VFD inverter+80W Water Pump+5m Water Pipe

Product Description: Designed for large, hollow work pieces such as pipe, tube or other material that has a large center hole. Triple ball bearing design. Shaft is made of alloy steel through heat treatment to Rc 60-62.

This item is a vintage Lathe Tailstock Pipe Center for metal lathe. The largest diameter is 2-7/8" and the smallest diameter is 25/32". The diameter of the center hole is 5/8".