700/24 for sale, brand-new and used.

???? 1 MY EBAY STORE 5 PCS 6 mm micro gear motor reducing gear box with small gears and coreless motor

NEW Pittman 9137C576-R4 DC Motor 700-10088-003 - 24 VDC, 1024 CPR A Pi

NEW Pittman 9137C576-R2 DC Motor 700-10088-001 - 24 VDC, 1024 CPR A Pi

Office: 830-775-2580 Our Asset #:KPH / MOTOR / 200-18-445/7T Qty available:10 200 hp 1800 RPM Frame 445T 447T 230/460 Volt V belt side pull 3 Yr Warrnty Gallery Photo

Office: 830-775-2580 Our Asset #:KSC629 / 036.2 MOTOR ONLY Qty available:1 60 HP DC MOTOR RELIANCE FRAME X503A 240 V 206 Amps 1150-2600rpm Make Offer! Gallery Photo

New Page 5 New Page 3 Untitled Document

New Page 5 New Page 3 Untitled Document

Thanks for looking at our items. The pictures depicted are of the exact make and model that is listed. All our pictures are ones that we have taken not generic ones.

Office: 830-775-2580 Our Asset #:KSCU / 020 Qty available:3 3hp SEW EURODRIVE DFT100LS4MM22B rpm 126-1720 MOBILGEAR 630 MOBILGEAR 630 23.44 Gallery Photo

Office: 830-775-2580 Our Asset #:KSCU / 87 / 1 / 5 Qty available:1 10 hp 215T frame Baldor EM3313T Super-E Premium-Efficient Motor 1750 rpm 240/480 Gallery Photo

Office: 830-775-2580 Our Asset #:KSCU / 44 Qty available:1 BALDOR Motor 10 hp frame 215T 1760 rpm 230/460 volts 3 ph Gallery Photo

Carbon Brushes 17X8X5mm for BOSCH Drill Generic Electric Motor Product Description: Carbon Brushes 17X8X5mm For BOSCH Drill Generic Electric Motor

Fluke Calibration P5514-70M Hydraulic Test Pump, 70 Mpa (10K Psi) New - Factory Authorized Distributor - Factory Warranty Generates pressures to 10,000 psi (700 bar) Bench mounted design Operational with a wide range of fluids Screw press for fine pressure adjustments Can be used with the 2700G Reference Pressure Gauge to provide a complete calibration solution Fluke Calibration P5514-70M Hydraulic Test Pump, 70 Mpa (10K Psi)

Note: we'll ship this item via express mail service to USA, Canada, Australia, New Zealand, Ireland, Austria, Belgium, Denmark, Germany, France, Finland, Luxemburg, Malta, Norway, Sweden, Swiss, Spain, Italy, UK, Japan, Korea,Thailand, Malaysia, Indonesia, Philippine, Singapore. Clients

Fluke Calibration P5522-50M Liquid-Liquid Separator, aggr fluid, 50Mpa New - Factory Authorized Distributor - Factory Warranty 0 psi to 10 000 psi (700 bar) Pressure range Compatible with Fluke Calibration P5514, P5515, P31XX and P32XX to 70 MPA (10K psi) max Aluminum bronze Body material Hard-anodized aluminum Reservoir Liquid/liquid and liquid/gas media separators are provided as a barrier between the deadweight tester operating fluid and that of the device under test.

Altek 134-2 PocketCal mA Calibrator New - Factory Warranty Basic Milliamp Functions Source 0.00 to 24.00 mA or -25.0 to 125.0%, read mA or percent to 24.00 mA, simulate 2-wire transmitters, power and measure 2-wire transmitters. Basic Accuracy A±( 0.08% of 24 mA Span + 1 LSD

ALTITUDE ENCODER READOUT TEST BOX MODEL AERTB-02448 This is a new product for the avionics test technician. It reads out the Gray code altitude presented by a blind encoder or encoding altimeter and/or the serial altitude presented on the serial ports. It can be used as a bench test readout or "under the panel" for in aircraft encoder correlation tests or troubleshooting encoder installations.

Fluke Calibration P5523-20M Liquid-Gas Interface, 20 Mpa New - Factory Authorized Distributor - Factory Warranty 0 psi to 10 000 psi (700 bar) Pressure range Compatible with Fluke Calibration P5514, P5515, P31XX and P32XX to 70 MPA (10K psi) max Aluminum bronze Body material Hard-anodized aluminum Reservoir Liquid/liquid and liquid/gas media separators are provided as a barrier between the deadweight tester operating fluid and that of the device under test.