8 inch fire hose for sale, brand-new and used.

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

INGERSOLL RAND 441A2 AIR BACKFILL TAMPER | 5-3/4" MALLEABLE BUTT | 47 LBS. | 1,750 BPM BB17 You are bidding on a INGERSOLL RAND AIR PNEUMATIC 441A2 BACKFILL TAMPER | 5-3/4" MALLEABLE BUTT | 47 LBS. | 1,750 BPM.

Stanbroil 21-Inch QCC1 Propane Hose and Regulator Connection Kit for Most LP Gas

10 INCHES LONG TAPERS TO 3/16 HOLE THIS MEASURES 1 1/2 INCH AT END BUT DOES NOT THREAD ONTO A NEW I 1/2 PIPE THREAD IT IS A LITTLE SMALLER INSIDE HAS ROUGH SAND CASTING FINISH IT IS BENT THERE ARE TOO MANY NICKS SCRATCHES WRENCH MARKS TO COUNT NEARLY AN EVEN FINISH THESE ARE NO EXTRA RIDGES ON IT NO DECORATIVE BANDS

USED ALLEN CO 1 1/2 FIRE HOSE VALVE NO 618R WITH CHAINED CAP AND EXTENSION ADJUSTS SMOOTHLY DOES HAVE A FEW SMALL SCRATCHES WOULD CLEAN UP NICELY ALSO LISTING 2 2 1/2 INCH VALVES WEIGHT 5 3/8 POUNDS Please email any questions.

USED ALLEN CO 2 1/2 U FIRE HOSE VALVE WITH CHAINED CAP ADJUSTS SMOOTHLY DOES HAVE A FEW SMALL SCRATCHES WOULD CLEAN UP NICELY ALSO LISTING 1 1/2 INCH VALVES WEIGHT 9 7/8 POUNDS Please email any questions.

Up for sale is a good used condition Holmatro Cutter 5" in good used tested 100% works. also included is a 50 foot hydralic hose and hose reel as pictured! Here are some specs: working pressure 10500 psi mineral base oil 63000 lbs recess 41000 blade center 5 inch cutting width 27 weight dimesions 8 3/4" X 32 7/8" X 5"

Protek- Style #307 - Hose Nozzle -Small lightweight nozzles designed for forestry/wildland firefighting -Quater turn operations gives a fast pattern change. -Adjustable pattern from straight stream to fog at any flow. -Variable flow setting 8-15-30 GPM (30-60-115 LPM) and off.

Retails for $2,444.00+ Gaco Western 183M 2LB Closed Cell Wall Spray Foam Insulation One 55 gallon drum of Part A and one 55 gallon drum of Part B New, Never Opened. Factory Sealed. Stored indoors in a temperature controlled environment.

Please read before you purchase: The operating temperature for this kit is between 60°F - 100°F for both the ambient (surrounding) temperature and the surface temperature of the material you are applying it to. Failure to use the kit within the recommended operating temperature range may cause your kit to dispense improperly. If stored in a cold climate, you MUST warm the kit to the recommended temperature before using it.

PRODUCT: VERSI-FOAM SYSTEM 100 SPRAY POLYURETHANE FOAM KIT, 1200 BOARD FEET (88 CUBIC FEET) FOAM SYSTEM. 92% OPEN CELL FOAM, 0.75 PCF DENSITY, R-4, CLASS-1 ASTM E-84 FIRE RATING. PRICE/KIT.