8 inch fire hose for sale, brand-new and used.

• One 6 inch NH/NST fire engine suction cap. • For the non-experts the size is measured by the ID (inside diameter of the discharge pipe) • Chrome plated brass • This cap has a distinctive circle pattern on the face. • Threads in good condition • Rubber gasket in good condition • Some small scratches and dings from usage, but overall the chrome is still in very good condition.

• One 6 inch NH/NST long handle “moon face” fire engine suction cap. • Made of chrome plated brass by Akron Brass Co. • Threads in good condition • Rubber gasket in good condition • Surplus from a fire department • Chome overall in good shape, with normal scratches and dings from usage, however, there is a chip in the chrome on one handle and a small flaked loose area on the back of one side (see photos) • Weight is 13.5 lbs - this

QTY 10 DISHARGE HOSES FOR TRASH/WATER PUMPS. VARIOUS LENGHTS see photos. THERE ARE 8- 3 inch and 2- 2.5 inch.

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

• This is Out of Service hose that was 1.5 inch ID double jacket fire hose. It is great for lining boat docks or other bumper guard type of applications, as well as a chaffing guard for ropes, mooring lines and anything else that will fit inside this 1.75 inch inside diameter hose (see photos, showing hose over a common 1.5 inch PVC plastic pipe).

• This is Out of Service hose that was 1.5 inch ID double jacket fire hose. It is great for lining boat docks or other bumper guard type of applications, as well as a chaffing guard for ropes, mooring lines and anything else that will fit inside this 1.75 inch inside diameter hose (see photos, showing hose over a common 1.5 inch PVC plastic pipe). • This is yellow hose that is now faded and battle scared in

Used snap tight 5 inch locking couplers in good condition passed inspection last year. Replaced faulty hosesand put on new couplings.

Firehose 2.625” wide in 50 ft rolls for boat dock bumper guard & apparel uses • This is Out of Service hose that was 1.5 inch ID single jacket wild land fire hose. It is light-weight, easy to handle and can be used for lining boat docks or other bumper guard type of applications. Because it is single jacket and easy to fold and sew, yet sturdy and durable, it is also highly sought after for repurposing into apparel items such as wallets, backpacks, sus

(8) double jacket Polyester Fire Hoses 2-1/2" x 50'NH couplings One hose has about a 1/4 inch hole in the outer jacket, see picture; inner jacket, okay. No other holes seen in other hoses. Ponn and other brand.

• This is Out of Service fire hose. It former forestry wild land hose, great for lining boat docks or other bumper guard type of applications as well as a chaffing guard for ropes, mooring lines and anything else that will fit inside this 1-1/2 inch ID (inside diameter) hose (see photos, showing hose pulled over a common 1” PVC plastic pipe). • Note, this is single jacket hose but it is NOT the very thin “lay-flat style” hose.

• This is Out of Service fire hose. It is great for bumper guard, rope line chafe guard and other abrasion prevention and protective guard type of applications. It can also be used for those who fashion apparel out of former fire hose.