ac calibrator for sale, brand-new and used.

ATCH-8 Three Phases Autotransformer (Auto Transformer) analog of: General Radio (GenRad), Staco, Acme, Bellott, Powerstat, Leeds & Northrup, L&N, Extech, EMCO, AEMC, but has the same or better characteristics. Designed for AC voltage smooth control with industrial frequency 50- 60 Hz. Quantity phases: 3;

AOMH-40 Single Phase Oil Autotransformer (Auto Transformer) analog of: General Radio (GenRad), Staco, Acme, Bellott, Powerstat, Leeds & Northrup, L&N, Extech, EMCO, AEMC, but has the same or better characteristics:| Quantity phases: 1; Nominal primary voltage: 127V/220V;

Fujifilm AC-4000B AC4000B Auto Calibrator DC24V 1A

DESCRIPTION: Number of Channels 4 Number of Digitizers 4 Max. Sample Rate Window 2 ms @ 4 GS/s in single-shot mode Sensitivity 2 mV/div to 1V/div, 50 , fully variable 2 mV/div to 10 V/div, 1 M, fully variable Offset Range 2.00 to 4.99 mV/div: ±400 mV 5.00 to 99 mV/div: ±1 V 0.1 to 0.99 V/div: ±10 V

Tektronix 1780R Video Measurement Set

PIE 535PIECAL 4-20/10-50 mA Dual Range Loop Calibrator New - Factory Authorized Distributor - Factory Warranty True +/- 0.025% of reading Read and Source 0.000 to 50.000 mA Display current or -25.00 to 125.00% of 4-20mA or 10-50mA Bar graph displays % of 4-20mA or 10-50 mA Bar graph displays % of 4-20mA or 10-50 mA The Practical Instrument Electronics (PIE) 535 brings you the features of the original Model 532 for 10-50 milliamp process loops.

THIS BID IS FOR ONE UNITThermostatic Calibrator PYROS+ DESCRIPTION:Thermostatic Calibrator PYROS+ ITEM IS IN GOOD WORKING CONDITION,COLLECTED FROMDEMOLISHED SHIP STORE.POWER SUPPLY_115V AC.TEMPERATURE RANGE:650 Degree C.T

Rotek 811A POWER ENERGY CALIBRATOR Model 811A The unit is in great condition with a dent on the bottom panel as shown in the photos.Photos are of the exact unit you will receive. Shipping is expensive as the unit weighs well over 100lbs. Recommended that the buyer arranges shipping method.

Rotek 800A Precision Wattmeter Calibrator Power (** I am also selling a Rotek 811A unit in my other auctions**) Shipping is expensive as the unit weighs well over 100lbs. Recommended that the buyer arranges shipping method. Series 800

FOR SALE: One (1) NEW IN BOX Loop Calibrator Model: UPS-III-2 made by GE Sensing. I just opened the box to make some pictures and taped it back up. As seen on the attached pictures, as provided by the manufacturer, this box comes with manual, Test leads in a plastic sealed bag.

Unit is operational with ac power, as the picture shows, but have not tried it with batteries. Includes manual, interface cable, carrying case, and power adapter.

New Page 1 Agilent U1401B Handheld Multi-function Calibrator/Meter

Up for Sell is a Druck DPI 603 Pressure Calibrator 300 PSI The cost effective DPI 603, which extends the GE range of rugged portable battery powered pressure calibrators, has standard ranges of -15 psig to 15 psi, 30 psi, 150 psi or 300 psi (-1 to 1 barg, 2 bar, 10 bar or 20 bar) with an accuracy of 0.075%. Designed for use in remote locations where AC power is not available, the DPI 603 enables pressure instrumentation to be serviced and calibrated.

VC05 Features: 1. Basic accuracy 0.05%, display 5 digits.2. Measures DCV and DCA.3.

Features: 1. Multimeter and process signal source 2in1. 2.

Valhalla Scientific 2555A AC-DC Current Calibrator This is in good physical condition and works fine.

100 turns calibration coil It can be useful to calibrate small clamps that cannot fit into the larger Fluke 5500A/COIL or also used to measure small current into a circuit. It can be added to a pc board to easily measure low current into a circuit. You a can either measure AC or DC current if you use an AC / DC clamp.

I just sell this eqipment as the picture is shown. We do not know more details. Anyone who want to buy should take into careful consideration about it before making decision.