On eBay for 19 years! We are a trusted seller with 100% feedback approval & high star ratings in all categories. We are honest in our listings, we ask that you read the ad carefully. If you are not sure about an item please ask questions before bidding. To ask a question please scroll down to the bottom of the page on the left side and click on the "ask a question" link. We rarely answer questions on weekends and during holidays, we will reply first thing next business day. Thank you for looking at our items. Dan Batson, DGD Inc Advanced Control Technologies Programmable Signal Generator w/ Pouch. I was unable to test this unit. This unit looks unused, and is in very good shape. This is in very good cosmetic condition. Item is sold as described. We pack and ship your item no later than the next day. FEATURES PortableandCompact Sealedkeypad-DirtandMoistureProof LCDdisplay-Userfriendlyprompts Generatesanalogandpulsesignaltypes for system checkout Instruction label on back of PSG for connections and use. BallisticNylonCarryingPouch APPLICATIONS • Benchtesting • FieldTesting • Troubleshooting • Training PRODUCT DESCRIPTION The PSG is a hand held programmable signal generator designed to simulate analog or pulse signals from controllers, sensors, and other building automation system components. It is designed as an aid to speed up the process of systemsetupandcalibration. PSGisequipped with a removable cable with alligator clips for power and signal attachment. User friendly prompts on the LCD screen and a membrane switch keypad allow the user to set the output values. The analog signal can be within the range of 0 to 10 volts or 0 to 20mA. The analog output can be programmed to deliver an absolute value or a minimum/maximum toggle output. Abso- lute: Enter a value, and PSG will output it. SPECIFICATIONS Electrical Requirements Power Supply Supply Voltage Maximum Current Fuse Analog Output (Current Mode) Current Span Resolution MIN/MAX Toggle: Enter a minimum value and a maximum value and toggle between the two, the minimum and maximum being adjustable as it is working. The pulse output is capable of delivering an Absolute, Looping, or Duty Cycle type pulse. Absolute: Enter a time, and PSG outputs it. The pulse duration can be entered in seconds, minutes, or hours. Looping: Enter an ON time and an OFF time and it will continue to pulse until stopped. Duty Cycle: Signal sent as a percentage of ON time and OFF time (from 0-100%) of a selected pulse period. This signal can be an absolute percentage, or minimum/maximum toggle be- tween the two percentages. 24 VAC or VDC (+/- 10%). 150 mA (rms) Internal, 5 x 20 mm, 250V, Fast Acting ACT# FS018 - 1ea. 0.025 amps, 250V, FA (LittleFuse 235.250 or Bussman GMA-250mA) 0-20 mA 8 bit, 255 steps Maximum Load Accuracy Analog Output (Voltage Mode) Voltage Span Resolution Minimum Load Accuracy Pulse Output Minimum Pulse Width Maximum Pulse Width Limits Fuse AC Pulse Wet Dry DC Pulse Wet Dry Minimum Load Display Type Contrast Adjustment Mechanical Requirements Connections Custom Cable Assembly Dimensions Weight Environmental Requirements Operating Temperature Storage Temperature Operating Humidity 500 ohms +/- .2mA of entered output value 0 to 10 VDC 8 bit, 255 steps 500 ohms +/- 0.1 volt of entered output value 1 milliseconds 999.99 hours 0.01 to 999.99 in second, minutes, or hours Internal, 5 x 20 mm, 250V, Fast Acting ACT# FS017 - 1ea. 0.1 amps, 250V , FA (LittleFuse 235.100 or Bussman GMA-100MA) Triac switched 24 VAC from supply voltage (AC power required) Triac switched external 9 to 24 VAC source Transistor switched 24 VDC from supply circuit Transistor switched external 5 to 30 VDC source 750 ohms LCD, 2 rows of 16 characters On left side of PSG (small screwdriver slot) With miniature alligator clips for all connections including power supply positive and negative, analog signal, wet and dry pulse connections and analog/wet pulse signal common 2.125" H x 4.01" W x 7.50" L 15 oz. (PSG, cable and ballistic nylon carrying pouch) 32 to 120 deg F. -20 to 150 deg F. 5 to 95% non-condensing @ 70 deg. C. Maximum Load Accuracy Analog Output (Voltage Mode) Voltage Span Resolution Minimum Load Accuracy Pulse Output Minimum Pulse Width Maximum Pulse Width Limits Fuse AC Pulse Wet Dry DC Pulse Wet Dry Minimum Load Display Type Contrast Adjustment Mechanical Requirements Connections Custom Cable Assembly Dimensions Weight Environmental Requirements Operating Temperature Storage Temperature Operating Humidity 500 ohms +/- .2mA of entered output value 0 to 10 VDC 8 bit, 255 steps 500 ohms +/- 0.1 volt of entered output value 1 milliseconds 999.99 hours 0.01 to 999.99 in second, minutes, or hours Internal, 5 x 20 mm, 250V, Fast Acting ACT# FS017 - 1ea. 0.1 amps, 250V , FA (LittleFuse 235.100 or Bussman GMA-100MA) Triac switched 24 VAC from supply voltage (AC power required) Triac switched external 9 to 24 VAC source Transistor switched 24 VDC from supply circuit Transistor switched external 5 to 30 VDC source 750 ohms LCD, 2 rows of 16 characters On left side of PSG (small screwdriver slot) With miniature alligator clips for all connections including power supply positive and negative, analog signal, wet and dry pulse connections and analog/wet pulse signal common 2.125" H x 4.01" W x 7.50" L 15 oz. (PSG, cable and ballistic nylon carrying pouch) 32 to 120 deg F. -20 to 150 deg F. 5 to 95% non-condensing @ 70 deg. C. Buyer pays shipping. We ship via ground shipping. Items are insured for their purchase price. Payment due within 3 business days of auction end. Unpaid item filed with eBay after 7 days (if you contact us we can work with buyer). We accept payment and credit cards thru PayPal and any other eBay accepted payment. Damage policy: We do our best to package your item so if it is dropped or mishandled it will still arrive in working condition. We have very few claims due to our careful packing procedures. If item is damaged, contact DGD Inc immediately and keep all packing materials. Refund policy: Items must be checked and tested in a reasonable amount of time after delivery. If a refund is requested, items must be shipped back IMMEDIATELY for refund. If we accept Canadian and International shipments on this item, there is an extra charge for documentation and customs paperwork. Canadian shipments add $5.00 paperwork fee. International add $10.00 if I ship thru USPS, if shipping other than USPS there is a $25.00 paperwork fee. This is due to customs invoices and time it takes to get shipping quotes. If there is a shipping cost shown in the auction, it is for the continental US 48 States. Hawaii, Alaska, US properties such as Puerto Rico, Canadian and international shipments have additional shipping costs as the quote in the auction is based on shipping in continental US. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up, do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as 'gifts' - US and International government regulations prohibit such behavior. AUCTION AD LISTINGS We are truthful in our descriptions and accurately describe our items. There are times when we do not have the ability and/or knowledge to fully test an item. We try to prevent listing items like that as much as possible. If we are unable to fully test, or we do not have knowledge of an item, it will be noted in the auction. If you are uncomfortable about the item and the way it is listed, please do not bid. If you can contact us about a way to test the item or give us more information so we can provide more information about the item please do so. Until you are satisfied with our response please do not bid. We want our buyers to be pleased with the item they receive. The sale if this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. Seller: DGD Inc 417/894-2682 Brighton, MO Surplus Reseller
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
