Altek Pocketcal 134-2 Milliamp Calibrator

US $1100

  • Memphis, Tennessee, United States
  • Nov 18th
This auction is for a Altek industries pocketcal 134-2 milliamp calibration device. I've verified it's output to be within specification and all functions seem to respond as intended.  The device is clean and comes with it's lcd protection plastic still in place indicating very little prior use.  It also comes with its original vinyl belt clip pouch which is in as good a condition as the device itself.  This is a close to factory condition device and I will gladly honor my 30 day return policy should you find the device unsatisfactory.   Thank you for your interest in our auction and please do not hesitate to ask us any questions you may have. Product Features Basic Milliamp Functions. Source 0.00 to 24.00 mA or -25.0 to 125.0%, read mA or percent to 24.00 mA, simulate 2-wire transmitters, power and measure 2-wire transmitters. Basic Accuracy. ±( 0.08% of 24 mA Span + 1 LSD)-Source to read within 0.03 mA. Quik-Chek Outputs HI and LO push-buttons for instant output of 20.00 or 4.00 mA. Speed sensitive digital potentiometer adjusts output from any QUIK-CHEK position for valve stroking. Power Up Transmitters Drives to 700 ohms loads. Long Battery Life Sources 12 mA for over 22 hours, 20 mA for over 16 hours. Turns itself off after 30 minutes. Dependable Operation. Fuseless protection to 120 V AC/DC. Product Description The Altek Pocketcal 134-2 will check, calibrate and measure all of your current signal instruments in a 4 to 20 milliamp DC loop. Use at every point in your loop. Source & read 0.00 to 24.00 mA, Simulate a two-wire transmitter or use the 134-2 to simultaneously power & measure your 2-wire transmitters. Toggle the display to show milliamps or percent of 4 to 20.Check loop wiring and receivers by using the 134-2 in place of a 2-wire transmitter. Simulate a changing process input to check loop response and control settings. The 134-2 uses any loop power from 3 to 42 VDC.Check controller outputs or measure the milliamp signal anywhere in the loop. The 134-2 measures 0.00 to 24.00 mA signals with much greater accuracy than a typical multimeter. Toggle the display to show milliamps or percent of 4 to 20. Product Details Item Weight: 2.5 pounds

Directions

Similar products from Process, Temperature & Pressure Calibrators

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies