angle countersink for sale, brand-new and used.

3/4" Dia- 10°-80° - Indexable Countersink & Chamfering Tool Fleximill An indexable countersink and chamfering tool that uses a standard TCMT insert, the Fleximill is capable of cutting angles from 10 to 80° with a simple twist of a Torx key.

Starrett 689-1Z in

Starrett 687-2Z in

Highlights: Holds 100 15-gauge nails; 1-1/4" to 2-1/2" smooth 70 - 120 PSI operating pressure 1/4" NPT air inlet Mylar-coated and weighs only 4.2 lbs.

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

M.A.FORD 6 Flute Countersink Sets - Tool Material: High Speed Steel Included Angle: 60° No of Flutes: 6 High Speed Steel Applications

M.A.FORD 6 Flute Countersink Sets - Tool Material: High Speed Steel Included Angle: 82° No of Flutes: 6 High Speed Steel Applications

var itemNumber = window.ebayItemID ?

You are bidding on ( 1 ) new KEO Cutters Special 97038-002, 1.625" x 0.313" x 2.980" SE, CD, TiN Spot Drill P/N 97038-002 Special Tool - Spot Drill ??? Single End Combined Drill w/ Flat Max Dia. - 1.625" Min.

KENNAMETAL Combination Chamfer and Countersink Drill SEF120140RSS125MSeries: SEFASMaximum Drill Diameter: 14mmMinimum Drill Diameter: 12mmChamfer Angle: 45Number of Drill Inserts: 2

60 degree SOLID CARBIDE CENTER DRILL LOT All 12 are new and all are 60 degree countersink angle There are 12 Drills in this lot all are unused 2 of each as follows. #1 with 1/8 diameter body and are 1-1/2 inches long #2 with 3/16 diameter body and are 2 inches long #3 with 1/4 diameter body and are 2 inches long #4 with 5/16 diameter body and are 2-1/8 inches long

You are bidding on ( 1 ) new IGE Solutions Inc. FORVCS35-45, 35mm x 45 degree, 80 Grit Countersink P/N FORVCS35-45 Dia. - 35mm Angle - 45 degree Grit - 80 Diamond - Coolant Fed FREE SHIPPING in the USA only.

LOT of 9 Keo #3 x 3" Cobalt 60° Combo Drill/Countersink 23032 1/4" Body 3" OAL Keo Cutters USA Made Long Series Cobalt Tools Machinists Metal Working Bits Tool Below is information as shown on supplier's site -- placed here for informational purposes.

The P260 is the stapler version of the P240 pneumatic nailer. Primatech's advanced compact firing valve optimizes job efficiency by getting the installer 4 1/2" closer to the end wall. This allows for installation of one or two additional boards and as such saves a significant amount of time.

Monster Combination Drill & Countersinks, Center Carbide Drill #5, 7/16 Dia, 6 OAL DE, 60 Deg Angle, 118 Deg Point, Mfg. No. 300-005005, Surplus.

PRODUCT OVERVIEW Model # NV65AH Internet # 202017405 Store SKU # 622943 Store SO SKU # 1000065237 Designed for use in serious siding applications, the Hitachi 2-1/2 in. Coil Siding Nailer features a compact design and weighs only 4.6 lb. to help increase productivity and prevent arm fatigue throughout the day.

Highlights: Accepts wire or plastic collated nails 360° exhaust deflector Depth of d