arbor nut for sale, brand-new and used.

CLARKE EZ-8 DRUM ARBOR/SHAFT PART # 67459A Fits both expanding and clamp drums Pulley key and self-locking nut

3/4" ARBOR HOLE - RIGHT HAND SPINDLE 1/2" STRAIGHT SHAFT- 3/4" ARBOR HOLE - THREADED SHAFT SIZE 1/2"

3/4" ARBOR HOLE - LEFT HAND SPINDLE - 1/2" STRAIGHT SHAFT ARBOR HOLE size is 3/4" - THREADED SHAFT SIZE 1/2"-

5/8" L ARBOR HOLE SPINDLE 1/2" STRAIGHT SHAFT 5/8" ARBOR HOLE - SHAFT SIZE 1/2" 3-7/16" LONG - LEFT HAND THREAD

5/8" ARBOR - SPINDLE 1/2" STRAIGHT SHAFT 5/8" ARBOR HOLE - SHAFT SIZE 1/2" -

SHARS 5/8" Keyless drill chuck with Morse Taper 3 Integral Shank 13mm --THIS UNIT DOES NOT CLOSE DOWN TO ZERO-- -- PLEASE REVIEW CAPACITY BEFORE PURCHASE-- 202-5094A Product description Capacity: 3/32-5/8" Shank Type: Morse Taper 3 Runout: .002" Tang type Product application Integral sha

I have a few Tannewitz Dado & Stub Arbors available This arbor is 1-1/4" Diameter and is a stub arbor Includes outer flange and Nut

BEARING FOR CLARKE EZ-8 DRUM SHAFT Unless your old flanges are bent or broken, you can save considerably by re-using them; there is no reason to pay for the whole assembly when you can replace just the bearing. (If you need the whole bearing, including the flange, we carry that as well.) This is

BEARING FOR CLARKE EZ-8 DRUM SHAFT This is a premium bearing with a heavier-duty flange--it weighs 3 1/2 ounces more than Clarke's stock bearing assembly (see comparison in second photo above), but is still a perfect fit.

BEARING FOR CLARKE EZ-8 DRUM SHAFT Unless your old flanges are bent or broken, you can save considerably by re-using them; there is no reason to pay for the whole assembly when you can replace just the bearing. This is a premium bearing with dual-lip seals--very important considering the du

Drill chuck arbor for sherline MT1 taper spindle, threaded for use with a draw bar. Also includes a washer and nut I used so that I could use the threaded portion of the spindle to remove the arbor with out hammering on the draw bar.

INCLUDES: • (1) 6" Crimped Wire Cup Brush (internal nut), .020, 5/8"-11 A.H. FEATURES: • For light to medium duty, general purpose applications · With intern

LISTING IS FOR A USED BEAVER TOOL QUICK CHANGE STUB MILLING

Metaltech, Pull Stud, BT40, 45 degrees, Thread M16, Length 60mm, Shaf 10mm, New var numImgsLoaded = 0; function autoSizeImageForSlides

Wholesale Direct Auto Parts

The Lotoons Store NEW Sait 09552 5-Inch by .020-Inch Crimp Wire Large Cup-Brush 5/8-11 Arbor Carbon Steel