arbor plates for press for sale, brand-new and used.

4 piece set consisting of a pair of hefty “universal” press bars for 30 to 40 ton presses PLUS a pair of PREMIUM X-BARS to cut unit loading of workpiece by at least half. Our X-BARS, BIG BARS and Press Plates are proudly used around the country by: Farm, Aviation, Auto and Heavy Duty shops, plus Racers, Marinas, Machine Tool, Industrial and Hobbyists of all descriptions. Where ordinary 20 ton plates are to short or to weak, these

These bars are being sold locally so, quantity for sale may change abruptly. Mighty 100 Ton Steel 2"x4". These steel bars are made specifically for 75 to 100 ton presses with a span of 10.5 inches.

Jet 3 ton arbor press .... I am selling New/other , this item has not been used please look at the pictures , look at the bottom of the ram no indications of use .. The press has some scuffs on it plus the red lever lock in the first picture , will lock the handle but the part you grab on is broken, its a plastic knob .

Note regarding fit: Measure your inside, front to back, bed gap. These 4 bars are intended for stand alone use on 20 ton presses with, front to back, gap of about 4.25". Your No.

Arbor Press Plates (Pair) Cut out of strength grade 50-A572- 1.5" thick steel, these arbor press plates are to replace the junk cast arbor plates that are prone to sha

Arbor Press Plates (Pair) 9.75"x9.75" Cut out of high grade 50-A572- 1.5" thick steel, these arbor press plates are to replace the junk cast arbor plates that are prone

premium hitch receiver for ford 12 weld on hitch ball mount for ford dodge chevy new 40 to 55 ton 2 notch shop arbor hydraulic press plates **

We can not keep this deal up forever. If this set is something you can use please buy it now to prevent disappointment. This 4 Piece Set is made for 20 ton shop presses front to back bed gap of 4.25 inches.

var itemNumber = window.ebayItemID ?

Your No. 1 Choice for Press Accessory Solutions We have 6 of these stocky little bars (THE GUY'S IN THE BACK CALL THEM "BITTY BARS") measuring 1" X 3/4" X 4.25”, in our shop. They were designed for use on our 6 Ton Famco arbor press where they support 12000 lbs.

Totally restored Famco #1 3/4-ton rated arbor press. This is the third one I've done and I know these presses inside and out. The unit has been stripped down to smallest individual parts, de-greased, de-rusted with a chelating solution for long-term protection, primed, and painted with high temperature VHT wrinkle paint on all surfaces including the bottom, then oven-cured at 175° for two hours for a durable finish.

Totally restored Famco #1 3/4-ton rated arbor press. This is the third one I've done and I know these presses inside and out. The unit has been stripped down to smallest individual parts, de-greased, de-rusted with a chelating solution for long-term protection, primed, and painted with high temperature VHT wrinkle paint on all surfaces including the bottom, then oven-cured at 175° for two hours for a durable finish.

Totally restored Famco #0 1/2-ton rated arbor press. This is the third one I've done and I know these presses inside and out. The unit has been stripped down to smallest individual parts, de-greased, de-rusted with a chelating solution for long-term protection, primed, and painted with high temperature VHT wrinkle paint on all surfaces including the bottom, then oven-cured at 175° for two hours for a durable finish.

Our X-BARS, BIG BARS and Press Plates are proudly used around the country by: Farm, Aviation, Auto and Heavy Duty shops, plus Racers, Marinas, Machine Tool, Industrial and Hobbyists of all descriptions. Sold in Matched Pairs

Your Bidding on a good condition Amp MFG in USA 126840-1 REV. C3 Arbor Frame for Press. See pics as this is what your bidding on, i believe this is missing the top bar and possible something else.

Wilton & JET Equipment 333650 - Arbor Press 5 Ton For all Production and assembly applications. Precision cut steel rams and pinions for accurate operation. Tables and slotted table-plates are flat and parallel to provide accurate support.

These bars were designed for use on our 1 Ton Palmgren arbor press where they easily support 2000 lbs. over the anvil wheel slot span of less than 1.25”. They are also useful as bench blocks, shims, and set-up blocks.

These 3 Ton Press Bars used flat (4 Ton used on edge), measuring 1/2" X 3/4" X 4.25, were designed for use on a 3 ton arbor press where they support 6000 lbs. over the anvil wheel slot span of 2” or less. These FULLY GROUND matched bars are handy for other uses such as set-up blocks and shims.