This tiny 4 piece press bar set measures 1/4" X 1/2" X 2" long. These were designed for use on a .5 ton arbor press where they support 1000 lbs. over the anvil wheel slot span of less than 1.06.” Edges are Hot Rolled Mill Finish, with scale, and are not ground.
We have 4 of these stocky little bars (THE GUY S IN THE BACK CALL THEM "BITTY BARS")measuring 1"X3/4" X 4.25”, in our shop. They were designed for use on our 6 Ton Famco arbor press where they easily support 12000 lbs. over the anvil wheel slot span of less than 2.75” They often find themselves over on the 30 ton “H” frame press as set-up blocks, blocking, or load spreading blocks in heavy load situations.
NOW with FREE telescoping LED lighted inspection mirror. This large, 3-3/8" diameter, 3 LED lighted inspection mirror is perfect for boiler, welding, under dash... inspection as well as shop press work.
These LONG bars are our finest press plates yet! these 20 ton plates are precision laser cut from high strength steel. They support from 20 tons, over a gap of 4.25".
This 4 pc set is now being offered with our PREMIUM X-BARS. Note regarding fit: Measure your inside, front to back, bed gap. These 4 bars are intended for stand alone use on 20 ton (or less) presses with, front to back, gap of about 4.25 inches.
Note regarding fit: Measure your inside, front to back, bed gap. These 4 bars are intended for stand alone use on 20 ton presses with, front to back, gap of about 4.25". These are the most economical press bars on the internet...shipped FREE right to your door!
Up for Sale are these 4'' x 4'' or 5'' x 5'' (your choice) Rosin press plates with Dual controllers,Dual Heating elements. These are 4 inch aluminum alloy plates, with 2 - 300w heater cartridges 3/8 Dia.(big) , XLR 5 pin plugs, Adjustment Bolts, Allen wrench, vise grip and spare fuse. This Controller can Run most Enail setups.
20 TON Press Brake DIY Builder Kit Press Brake kit comes unassembled, you do the final assembly and welding. Designed to fit the Harbor Freight 20 ton hydraulic press Item # 32879 &
These bars were designed for use on 2 Ton arbor presses where they easily support 4000 lbs. over the anvil wheel slot span of less than 1.42”. They are also useful as bench blocks, shims, and set-up blocks.
You SAVE $120 by using this COUPON===== Please READ carefully NO CANCELLATIONS---If your the winning BIDDER you WILL be responsible-------Your buying a COUPON for the pictured item, not the Hoist itself. You will then take the coupon to a Harbor Freight store and purchase the item. This is a COUPON This is a Harbor freight COUPON ONLY to buy a Drywall Panel HOIST made by Haul Master + a FREE coupon for a 6 PIECE SCREWDRIVER SET with purchase.
You are bidding on a COMPLETE diagnostics laboratory facility. For complete inventory list, visit the page listed below and view the catalog. Please call 805-617-0122 for more info or visit
Rosin heat press plates, controller, two heaters, and temperature control sensor. Arbor press not included. For use with presses up to 20 tons, dual voltage for worldwide use, 200 watt.
You are bidding on: ................. One Harbor Freight Coupon ........................... ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- You can use this coupon at Harbor Freight Tools for: 20 Ton Sh
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.