arc 7 for sale, brand-new and used.

HAAS HA5C

HAAS HA5C

HAAS HA5C

HAAS HA5C

500 mm face diameter = 19.7" Near perfect condition; one small scratch on the table surface from a small item that fell on it. (see last photo to the left and above the quarter) The dirty looking surface is a protective coating with a bit of dust in it. I have owned this for many years, as the second owner.

This has been sitting in my shop for about a year, but it's never been used, or even hooked up, It is missing the Grounding cable, but the rest is there, as seen in the pics. The torch lead is 50 foot. The retail price for this is almost $2800.00.

New! Hypertherm Powermax 45 Plasma Cutting System with 20' T45V hand torch P/N 088016 New in box Hypertherm Powermax 45 plasma cutting system - - comes with Hypertherm full 3 year warranty on the power source. Cuts up to 3/8" thick material at 10 inches per minute with a maximum severance cut of 3/4".

Barely used hypertherm powermax plasma cutter G3 series 1000 YOU ARE BIDDING ON A Hypertherm powermax 1000 IN EXCELLENT CONDITION ""it comes as shown in the pictures""".

HAS A KN AROSON HYBRID D6B ( CUTTING MACHINE CONTROL (OPERATOR'S MANUAL INCLUDED, DATED FEB., 1990) TRACER 1K-1500G HL-8 CONTROL ( OPERATOR'S MANUAL INCLUDED, AUG 1990) TWO TYPES OF CUTTING METHODS, 1. PLASMA UP TO 1/4" THK, 2. OXY FUEL UP TO 7" THK FOOT PRINT IS 14' X 13', WILL HANDLE A 5' X 10' SHEET WATER COOLED OPERATOR MANUALS FOR PLASMA ARC CUTTING SYSTEM (REV 0, DATED DEC., 1995 HYPERTHERM, AND REV 2 DATED JUNE 1996 HYPERTHERM

Multiplaz 3500 - is a hi-tech plasma device of hand-held welding and metal cutting.

Hypertherm Powermax 45 Plasma Cutting System with 20' T45V hand torch P/N 088016 New in Box Hypertherm Powermax 45 plasma cutting system - comes with Hypertherm full 3 year warranty on the power source. Cuts up to 3/8" thick material at 10 inches per minute with a maximum severance cut of 3/4". Operates on 200 - 240v single phase power, 50/60hz.

Hypertherm Powermax 85 Plasma Cutting System with 25' hand torch P/N 087108 Hypertherm factory refurbished Powermax 85 plasma cutting system in near new condition - comes with Hypertherm 3 year warranty on the power source. Exactly the same machine as new models - cuts up to 1.25" thick material at 10 inches per minute. Operates on 200 to 480/600v single or 3phase 50/60hz power - certified to CSA standards.

Hypertherm HD3070 HyDefintion Plasma Cutting System w/ Automatic Gas Console, RHF Console, PAC184 Cutting Torch and Torch Leads Retailed for approximately $30,000 when new. Hypertherm HyDefinition 100-Amp Oxygen Plasma Cutting System HD3070 with LongLife ® Oxygen Technology For a Wide Range of Metals and Thicknesses, Hypertherm Delivers More The HD3070 is designed to cut mild steel, stainless steel, copper and aluminum with the appropriate gases and consumables selected.

Video 1: 3 min Draw and Cut (7 sec Cutting time) Yes, we include the water spray cap and water system with the set. Spraying water helps the thin metal plate not to bend due to the heat generated during the cut. Specification &