bars of steel for sale, brand-new and used.

var itemNumber = window.ebayItemID ?

Our X-BARS, BIG BARS and Press Plates are proudly used around the country by: Farm, Aviation, Auto and Heavy Duty shops, plus Racers, Marinas, Machine Tool, Industrial and Hobbyists of all descriptions. Sold in Matched Pairs

Note regarding fit: Measure your inside, front to back, bed gap. These 4 bars are intended for stand alone use on 20 ton presses with, front to back, gap of about 4.25". These are the most economical press bars on the internet...shipped FREE right to your door!

These 3 Ton Press Bars used flat (4 Ton used on edge), measuring 1/2" X 3/4" X 4.25, were designed for use on a 3 ton arbor press where they support 6000 lbs. over the anvil wheel slot span of 2” or less. These FULLY GROUND matched bars are handy for other uses such as set-up blocks and shims.

Untitled Document

Untitled Document

Untitled Document

var itemNumber = window.ebayItemID ?

Ted's Trucks 1181 County Rd 560 Midland City AL 36350 334-983-1092 Bobrick B-6806x18 Concealed Mounting W/ Snap Flange Grab Bars 18-8 S, type-304, 18-gauge (1.2mm) stainless steel tubing Satin-finish. 1-1/2" (38mm) outside diameter. Ends are heliarc welded to flanges.

We accept Pal Pay at our on line store, wear you can purchase all our products . Thanks

We have 4 of these stocky little bars (THE GUY S IN THE BACK CALL THEM "BITTY BARS")measuring 1"X3/4" X 4.25”, in our shop. They were designed for use on our 6 Ton Famco arbor press where they easily support 12000 lbs. over the anvil wheel slot span of less than 2.75” They often find themselves over on the 30 ton “H” frame press as set-up blocks, blocking, or load spreading blocks in heavy load situations.

File Cabinet locks are a fantastic way to secure your file cabinet items and comply with H.I.P.A.A regulations. This easy to use, easy to install bar solidly fastens to the side of any file cabinet (.5 inches of space needed next to drawers). Bar has a closed end for additional security and a hassle-free knob for effortless and smooth operation.

Product Description BID IS FOR FOUR BMS Round Stainless Brake Bar for SMC rack Low Prices Every Day! Quick Delivery 100% Safe and Secure Shopping Direct Replacement for SMC Stainless and Aluminum Bars Heavy Wall Stainless Tube for Long Life and Smooth Control Offset Design for Increased Strength and Rope Contact Area Eliminates Rope Staining Caused by Aluminum Bars Recommended for Use with Hyper-Bars to Eliminate Rope C

(1) - NEW CTS THOMPSON #1010 HARDENED CARBON STAINLESS HANDCUFF WITH POSITIVE CLICKBAK LOADING SYSTEM. PINK GARCOTE PLATED. * NIJ CERTIFIED &nbs

These LONG bars are our finest press plates yet! these 20 ton plates are precision laser cut from high strength steel. They support from 20 tons, over a gap of 4.25".

Your No. 1 Choice for Press Accessory Solutions We have 6 of these stocky little bars (THE GUY'S IN THE BACK CALL THEM "BITTY BARS") measuring 1" X 3/4" X 4.25”, in our shop. They were designed for use on our 6 Ton Famco arbor press where they support 12000 lbs.

These bars were designed for use on 2 Ton arbor presses where they easily support 4000 lbs. over the anvil wheel slot span of less than 1.42”. They are also useful as bench blocks, shims, and set-up blocks.

These bars were designed for use on our 1 Ton Palmgren arbor press where they easily support 2000 lbs. over the anvil wheel slot span of less than 1.25”. They are also useful as bench blocks, shims, and set-up blocks.