blower motor assembly for sale, brand-new and used.

LANDIS AutoSoler Finishing Machine. 220 Volt AC Main Power for Blower Motor, Trimmer, and Sanding Wheels, with 110 Volt AC for Numb Keg and Brush Section. Strong, Dependable, Work Horse, 3 Shoe Makers can work all together at the same time on this machine.

USA Daily Deals Glastender 06001453 Blower Motor Assembly

This is an unused Dayton motor / blower assembly, originally intended for use with an Airflow Systems DTH-1700 downdraft table. The motor is a Dayton VM3500T, 1 1/2HP, 3450RPM, 230/460VAC, 3 Phase with the specs listed below. The blower is 10 1/2" in diameter, cast aluminum, with six blades.

Greenheck Vector H Isolation FAN VK-H-12-M30-X High Plume Laboratory Exhaust Blower Fan EXPLOSION PROOF PREMIUM EFFICIENCY3-PHASE INDUCTION MOTOR EQP III

Dayton 2C889 Blower Assembly with Dayton 6K778B 1/3 Hp Motor. The blower assembly has a 9" squirrel cage on it. Worked fine.

[ Dayton 1/4 HP 2500 FPM Air Curtain Blower Assembly

Auctiva's FREE Scrolling Gallery will enhance your

Brand new AO Smith blower assembly, M# FPSE 75-250 please see my other auctions - I have a lot of AO smith & Reznor motors and parts avaialble

USA Daily Deals Century U9460 70 CFM Blower Assembly Replaces Fasco A071

Here is a virtually new centrifugal blower motor from EMB-PAPBST.  The motor was previously installed in an assembly that was damaged by water (the motor was never wet only the chassis of the unit it was in).  The unit was new so the only run-time the motor had was during product testing so probably somewhere in the 2 - 3 hour range. These blowers suck air axially in through the center of the blower wheel and discharge it centrifugally 360 degrees from the side.

This is a used blower motor, wheel, and fixture assembly for a Lucks M20 oven.  If you're looking at t

Good used condition - Pulled from a university surplus Panasonic NE-1757R commercial microwave. Panasonic blower fan +motor asssembly - Part number PANA400A3660AP - For 240 VAC systems. Will be packaged carefully and shipped via USPS or FedEx - Free shipping to continental USA!

Combustion blower motor assembly. Only six months of usage! Came off Miller M1 series furnace.

Q2U LLC, formerly Davelle Broan S97012038 Ventilation Fan Motor and Blower W

Brand New: Middleby 27170-0011 Burner Blower Motor 42810-0073 Replacement Assembly Motor & Fan Burner - This burner blower motor is used on the following Middleby oven models: PS350/JS350, PS360/JS360, PS570

A Brand New Centrifugal Blower 0.55KW 2900rpm Centrifugal Fan 230v single phase. In a high quality stove enamelled scroll for excellent long term corrosion prevention European made motor, final assembly UK This fan moves appx moves appx 1300m3/hr at max pressure of 800Pa

1500 RPM Shaded Pole Blower .55 amps, 115 Volts 60/50hz. Name Plate CFM 105 Rotation CWSE

Nutone QT80 fan motor and blower wheel assembly.This item is used and in good working order.It has been cleaned and testedIt will fit in the following units:QT80QT90QT100