break lathe for sale, brand-new and used.

This is a used Heavy Cast Iron mounting end or foot for the 2 1/4" tubular bed from a Ridgid WL-12000 12" wood lathe with a 2 1/4" diameter tubular bed. Some wear and tear dust and dirt and staining but In very good working shape Local Pick-up Available I will combine shipping on multiple purchases when practical. Please complete bidding then request a combined invoice.

This is a Vintage Heavy High Quality #2 Morse Taper drill bit as pictured from a Vintage 12" Sears Craftsman Metal Lathe #101.07403 with a 2 3/4" gap between bed rails. Have wear and tear dust and dirt some nicks rust and pitting but in good working condition. These could be used for a wood lathe also.

This is a very informational book for the Care and Operation of a Screw Cutting Lathe. as pictured from a Vintage 12" Sears Craftsman Metal Lathe #101.07403 with a 2 3/4" gap between bed rails. Has wear and tear dust and dirt but in good working condition.

This is a group of metal lathe cutting tools more than 9 pounds as pictured from a Vintage 12" Sears Craftsman Metal Lathe #101.07403 with a 2 3/4" gap between bed rails. I don't know what all this is I'm a wood not metal worker --- it is priced to sell and is sold AS PICTURED. Have wear and tear dust and dirt and rust and pitting but in good working condition.

This is a group of metal lathe cutting tools more than 8 pounds as pictured from a Vintage 12" Sears Craftsman Metal Lathe #101.07403 with a 2 3/4" gap between bed rails. I don't know what all this is I'm a wood not metal worker --- it is priced to sell and is sold AS PICTURED. Have wear and tear dust and dirt and rust and pitting but in good working condition.

This is a group of metal lathe cutting tools more than 8 pounds as pictured from a Vintage 12" Sears Craftsman Metal Lathe #101.07403 with a 2 3/4" gap between bed rails. I don't know what all this is I'm a wood not metal worker --- it is priced to sell and is sold AS PICTURED. Have wear and tear dust and dirt and rust and pitting but in good working condition.

This is a group of metal lathe cutting tools more than 8 pounds as pictured from a Vintage 12" Sears Craftsman Metal Lathe #101.07403 with a 2 3/4" gap between bed rails. I don't know what all this is I'm a wood not metal worker --- it is priced to sell and is sold AS PICTURED. Have wear and tear dust and dirt and rust and pitting but in good working condition.

This is a group of metal lathe Drill or tapping bits ????? tools weighing more than 3 pounds as pictured from a Vintage 12" Sears Craftsman Metal Lathe #101.07403 with a 2 3/4" gap between bed rails. I don't know what all this is I'm a wood not metal worker --- it is priced to sell and is sold AS PICTURED.

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915 and 1916, Volume 2, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2008. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-371-3.

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.

This is a REALLY nice Vintage 6" diameter 6 Jaw Buck Chuck #3662 Made in USA in GREAT condition for age. Came from a vintage Sears Craftsman Wood Lathe. This comes complete with 2 Keys all 6 jaws and a custom plate for mounting on a lathe with a 3/4" bore clockwise mount (right handed) common to many Sears and Other Manufacturers Lathes.

This is a group of 7 Carbide tipped cutting tools from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago This is a group of 7 2" Long Copper colored Marked D-4 Grade C6 Measure 1/4" Square 2" Long. Made in Detroit Michigan by Metallurgical division of General Electric. These are considered New Old Stock NOS.Unused but not manufactured recently Lots of surface rust and dust and dirt but in very good working condition.

This is a Heavy steel small lathe dog the body is 2 1/2" long as pictured from a Vintage lathe Some Wear and tear rust dust and dirt Rust and Pitting paint loss but in good working condition. Local Pick-up Available I will combine shipping on multiple purchases when practical. Please complete bidding then request a combined invoice.

This is a HEAVY Indexable Tip Toolholder from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago These is a High Quality HEAVY tool--weigh over 3 pounds total. Measures about 7" Long 1 1/4" X 1 1/4" The cutting end is @ 2" Tall and 1 1/2" wide. Most of these tools are considered New Old Stock NOS.Unused but not manufactured recently Minor surface rust and dust and dirt but in very good working condition.

This is a set of 4 different HEAVY Indexable Tip Toolholders from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago These are High Quality HEAVY tools--weigh over 7 pounds total. Measures about 6" Long 1" X 1" The cutting end is @ 1 5/8" Tall and 1 1/2" wide. Most of these tools are considered New Old Stock NOS.Unused but not manufactured recently Minor surface rust and dust and dirt but in very good working condition.

This is a set of 4 different HEAVY Indexable Tip Toolholders from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago These are High Quality HEAVY tools--weigh over 7 pounds total. Measures about 6" Long 1" X 1" The cutting end is @ 1 5/8" Tall and 1 1/2" wide. Most of these tools are considered New Old Stock NOS.Unused but not manufactured recently Minor surface rust and dust and dirt but in very good working condition.

This is a pair of Indexable Tip Toolholders from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago This is a pair of High Quality HEAVY tools--weigh over 6 pounds. Measures about 7" Long 1" X 1 1/2" The cutting end is @ 2" Tall and 1 1/4" wide. Most of these tools are considered New Old Stock NOS.Unused but not manufactured recently Minor surface rust and dust and dirt but in very good working condition.

This is a HEAVY Indexable Tip Toolholder from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago These is a High Quality HEAVY tool--weigh over 2 pounds total. Measures about 6" Long 1" Wide and 1 1/4" Tall The cutting end is @ 1 3/8" Tall and 1 " wide. Most of these tools are considered New Old Stock NOS.Unused but not manufactured recently Minor surface rust and dust and dirt but in very good working condition.

This is a HEAVY Indexable Tip Toolholder from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago These is a High Quality HEAVY tool--weigh over 3 pounds total. Measures about 7" Long 1 1/4" X 1 1/4" The cutting end is @ 2" Tall and 1 1/2" wide. Most of these tools are considered New Old Stock NOS.Unused but not manufactured recently Minor surface rust and dust and dirt but in very good working condition.

This is an Indexable Tip Toolholder from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago This is a High Quality HEAVY tool--weighs over 3 pounds. Measures about 7" Long 1" X 1 1/2" The cutting end is @ 2" Tall and 1 1/2" wide. Most of these tools are considered New Old Stock NOS.Unused but not manufactured recently Minor surface rust and dust and dirt but in very good working condition.