break lathe for sale, brand-new and used.

Lets face it when you buy a probe there is a strong likely that you will break a ruby tip I sell a lot of replacement run tips for $27 with shipping

This is a nice strong running Dual Shaft A.C. Motor from a vintage Sears Craftsman 12" Wood Lathe Model # 149-23871 with twin 1" diameter tubular bed rails 1/2 Horsepower 1725 RPM 60 HZ 1 phase 115 Volt 8.4 amp reversible wired right handed Clockwise on 5/8" (right) shaft as you face the nameplate. Comes with mounting bracket and clips...key and spindle cover as pictured.

This is a nice strong running 1/2 Horsepower Capacitor Start Electric Motor from a Wood Lathe. It is General Application and Lathe and Band Saw and drill press It is 1/2 Horsepower 1725 RPM 60 HZ single phase 115 Volt 8.8 amp. Clockwise (right handed) rotation at shaft end Reversible Some Wear and tear rust dust and dirt but in good working condition for age.

This is a strong running HEAVY General Electric 1/2 Horse Power Dual Shaft Utility motor with Thermal Protection from a band saw. 1/2 Horsepower Model 1E166A 115 Volt 60 Hz 7.5 amp 1725 RPM 1 phase.with reset button The shafts are each 5/8" diameter with a key slot both about 1 7/8" Long It has wear and tear dust and dirt rust and pitting but runs strong. Comes with 1 key and built in mounting bracket as pictured.

This item was barely used. It is in excellent condition and includes all the original 9 tap adapters. This allows you to easily tap nearly any thread and ensure that the tap is straight and that you do not break the tap.

This is a strong running Heavy electric motor from a vintage Sears Craftsman 12" Wood Lathe Model # 149-23871 with twin 1" diameter tubular bed rails. Wear and tear dust and dirt rust and pitting but in good working condition. 1/2 Horsepower single phase 1725 RPM 115 Volt 7.5 amp 60 cycle.

This is a strong running Dual Shaft 1/2 Horsepower Powr Kraft AC Capacitor Start Motor with Ball Bearings from a Wood Lathe Dust and dirt wear and tear rust and pitting but in good working condition.The switch on the motor does not work. This was plugged into a switch on the table 1/2 Horse Power 1725 RPM 115 Volt 60 Cycle 7.8 amp.1 phase. 60 HZ Has 5/8" diameter shafts with key way about 2" long overall.

This is a strong running Dual shaft electric motor from a used Sears Craftsman 12" Wood Lathe Model # 113.23801 Some dust and dirt wear and tear but in good working condition.. 1/2 Horsepower single phase 1725 RPM 120 Volt 7.5 amp 60 cycle. Has a 5/8" diameter shaft flat with key slot & Key about 2" long overall on right side as you face the nameplate.

This is a strong running electric motor from a lightly used Sears Craftsman 12" Wood Lathe Model # 113.228162 Some dust and dirt wear and tear but in good working condition.Some touch up paint on top. 1/2 Horsepower single phase 1725 RPM 120 Volt 7.5 amp 60 cycle. Has a 5/8" diameter shaft flat sided about 2" long overall.

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos

This is a strong running 1/3 Horsepower Montgomery Wards Powr Kraft AC electric motor from a Wood Lathe Dust and dirt wear and tear rust and pitting but in good working condition.1/3 Horse 1750 RPM 115 Volt 60 Cycle 6.4 amp.1 phase. Has been re-painted. Has a 1/2" diameter shaft flat sided about 1 5/8" long overall.

This is a box of about 1 pound of carbide tipped cutting tools 3/8" square from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago. They are about 2 1/2" long red plated. Made I believe in the Ukraine.

Specification:

This is a box of 4 carbide tipped cutting tools from a supply of 1000's of parts from a Vintage Large metal lathe kept in storage from a Metal shop that closed years ago. They are about 6" long red and silver plated. Made in USA New Old Stock--Unused but not new.

This auction is for the three #3 Morse Taper to #2 Morse Taper Adapters and tap as pictured from a Lathe. 1 says 58 Tap 952689 Logo upside down pyramid with MT insideThe other to #2 to #3 unmarked Wear and Tear Dust and Dirt Rust and pitting but OK working condition. Local Pick-up Available I will combine shipping on multiple purchases when practical.

This auction is for the assorted parts as pictured that came with a Metal Lathe I have NO idea what they are for..what they are worth so I'm selling the entire amount with a low starting price. Has wear and tear dust and dirt rust and pitting but appear to b

This auction is for the assorted parts Alloy & Steel as pictured that came with a Metal Lathe. These are priced AS FOUND AS IS!!!!! I have NO idea what they are for..what they are worth so I'm selling th

This auction is for the assorted parts as pictured that came with a Metal Lathe I have NO idea what they are for..what they are worth so I'm selling the entire amount with a low starting price. Has wear and tear dust and dirt rust and pitting but appear to be in good working condition.

This auction is for the assorted parts as pictured that came with a Metal Lathe I have NO idea what they are for..what they are worth so I'm selling the entire amount with a low starting price. Has wear and tear dus