bushing nut for sale, brand-new and used.

THIS ITEM IS A POTENTIOMETER MADE BY BI TECHNOLOGIES DUAL 100K AUDIO TAPER, 1/2 WATT, CONDUCTIVE PLASTIC, BUT THE TAPERS ARE NOT THE SAME. I measured a pot and here are the results, looking at the shaft, solder terminals down: TOTAL RES. 25% 50% 75% (% of shaft rotation ) FRONT: &nb

Misc of new and used Partner/Husqvarna parts: Partner Bin Mfr / Make Part Description Part # Qty

Click to Enlarge Click to Enlarge

You are purchasing a bag of 10 new SKINTOP cable seals from LAPP. These are designed for cables 2.5 - 6.5 mm (.098 to .256 inch) diameter cables. The wrenching flats are 15mm.

You are bidding an a NEW, single switch, C&K C & K Miniature Toggle Switch 7107 7107P3YZ2QE Aircraft Avionics. There is one switch in a single bag, the other 47 switches are in a bulk bag.

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR ONE: HELIPOT PRECISION POTENTIOMETER / BI TECHNOLOGIES P/N: 3381-R5K L.5 5K OHMS (5,000 OHMS) CONDUCTIVE PLASTIC ELEMENT TOL.: 10% LIN: +/- 0.5% LINEAR TAPER CONTINUOUS ROTATION (NO STOPS) Turret sol

LOT OF 1 (ONE): BOURNS 3852E-162-154A LOCKING POTENTIOMETER 150K OHM CERMET 2 WATTS LINEAR TAPER, SD ADJUST. SINGLE TURN 3/4" DIAMETER X 1/4"D, 1/4" LOCKING BUSHING SOLDER LUG TERMINALS New, old stock, with mounting nut, lockwasher & locking nut. Buyer pays S&H, $2.95 in USA, $7.95 worldwide.

MANUFACTURER'S DESCRIPTIONAdaptors held on drivers with knurled nut. Small and medium drivers (A157-3 and A157-2) fit all smaller bushings (A157-6 thru A157-12); large driver (A157-1) fits remaining bushings (A157-13 thru A157-22). Set comes packaged in PB20 storage case.

Hi Ebayers , you are potentially buying it now on quantity 2pcs solenoids Made by MSA part number is 7164/0526 12vdc ... I have taken some pictures and put the solenoid next to a ruler to show the size s , The O.D. is 1 inch , the bushing is .75 inch O.D.

Hardened, ground and accurate Features Arbors and spacers have standard size keyways. Style A Has pilot with 23/32" diameter x 1-3/4" length. Style B Draw bar type.

51-1/4B15-4 MILLING MACHINE ARBOR - TTC National Standard 30-40-50 Tapers Features Arbors and spacers have standard size keyways. Style A Has pilot with 23/32" diameter x 1-3/4" length. Style B Draw bar type.

41-1/4-A8 MILLING MACHINE ARBOR - TTC National Standard 30-40-50 Tapers Features Arbors and spacers have standard size keyways. Style A Has pilot with 23/32" diameter x 1-3/4" length. Style B Draw bar type.

NEW CLIPPARD SDR-32-1, 2" Bore S/S Cylinder, Stud Mount, Rotating Rod,

*** ALL POTS I SELL (NEW OR USED) ARE TESTED AND GUARANTEED GOOD*** This item is for 1 (one) BECKMAN/HELIPOT (now BI TECHNOLOGIES) Precision continuous rotation potentiometer. Helipot Model 5611-R1K-L.50 Resistance: 1K ohm Tol: 5% Lin. Tol.: .5% Wirewound RATED 3.5 WATTS 3/8" BUSHING MOUNT

Plumbing Inventory We have four available, just ask to list the others if you need them. Includes 1000 feet of Schedule 120 PVC main pipe that is super durable. Schedule 120 PVC isn't available in the consumer market and retails for over $11 per foot.

New in Box!!! GREAT DEAL!!!   WINCH WITH CONTROL PANEL KIT FOR SHELTER INSTALLATION

ChemGlass Flex-Drive Coupling for 10mm OD Stirrer Shaft

New American made carbon steel adjustable reamer. Sizes 27/32" to 15/16" or the equivalent to 21.43mm to 23.81mm. I'm not the expert in metric sizing so I simply converted the inch sizes to mm sizes.

qnt

CENTRALAB 1M Ohm - Dual 2 Gang - Center TAP Potentiometer - Linear NOS - 1969 Date Code Single Turn