bushing nut for sale, brand-new and used.

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR: 1 (one) CTS, 1/2 WATT, POTENTIOMETER RV6-SIZE, SD ADJUST, LOCKING 500K (500,000) OHM, 1/2 WATT LINEAR TAPER DIM: 1/2" OD X 5/8" DEEP BUSHING: 1/4-32 X 1/2"L SHAFT: 1/8" X 1/8"L, SLOTTED

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR: 1 (one) CTS, 1/2 WATT, POTENTIOMETER RV6-SIZE, SD ADJUST, LOCKING 10K (10,000) OHM, 1/2 WATT LINEAR TAPER DIM: 1/2" OD X 5/8" DEEP BUSHING: 1/4-32 X 1/2"L SHAFT: 1/8" X 1/8"L, SLOTTED

New Clarostat / Honeywell 5K ohm 2 Watt Wire Wound Potentiometer Part number: RA20NASD502A Military spec, 2 watt, wire wound potentiometer. See below for part number decode. Sale is for one (1) new potentiometer.

New Clarostat / Honeywell 10K ohm Potentiometer Part number: RV4NAYSD103A 53C310K Military grade potentiometer. See below for part number decode. Sale is for one (1) new potentiometer.

BOX OF 10 CGB297 3/4" STR CGB .750-.875 Dia Male Cord Grip Straight Male; Rugged Zinc Electroplated Chromate Steel Body/Gland Nut, Neoprene Bushing; Cord Size 0.75 to 0.875 Inch; Size 1-1/4 Inch Dia; Approval Ul 514-B, Csa 22.2; Application Wet Location; Crouse-Hinds[R] Brand; CGB Model

Zing Ear ZE-105 Black Rotary Switch This switch mounts into ceiling and canopy lights. Includes mounting nut, bushing, and black knob with serrations. Zing Ear Specifications Model: ZE-105M Snap-in 125V/3A

Clarostat 5K OHM Pot Audio Taper Potentiometer with an ALTERNATING Momentary DPST Switch (2 Pole, 1 Throw) 1 "Buy it Now" is for 1 Pot When the button is pressed, one pole is closed, when released, the other pole closes. Can be wired like a SPST with either NC or NO contacts, or you can wire both poles at the same time (One is open while the other is closed) Specifications: Brand: Clarostat Part: 1320-3027-7 Resistance: 5K OHM Resistance Type: Audio Taper Tolerance: 5

NOBLE Dual 25K Ohm A LOG Pot 30x Detents Center Tap Potentiometer NOS Vol Audio Single Turn with 30x Detents and Center Tap

Radio Shack Archer 275-1386, 2P6T Rotary Switch, 6 position Solder terminals Ratings: 300ma @ 120vac Mounting hole: 3/8 inch diameter. Threaded bushing is 0.25 inch long. Mounting hardware: Nut, washer Dimensions: Shaft length: 1 5/16 inches (approx.) Shaft diameter: 1/4 inch Body diameter: 1 1/4 inch at widest point, 1 inch at narrowest point (approx.) Length behind panel (to tip of longest terminals): 13/16 inch (approx.) New old stock.

6 -3/4 couplings, 5 -3/4 conn, 3 -3/4 flex conn,  few 1/2- fittin

THIS ITEM IF FOR 1 (ONE): ROTARY SWITCH 2 POLES -- 12 POSITIONS (2 poles/deck, 1 deck) 15 DEGREE INDEXING, FIXED STOP NON-SHORTING CONTACTS (break before make) Contacts are silver plated and are tarnished. They could be used for pc mount or easily soldered to. Made by Ledex DIM: 2 1/4" OD X 7/8" D 3/8-32 b

Potentiometer, 10-Turn, 10K? ±5%, 2W, Panel Mount, Solder Lug Bourns #3590S-2-103 FEATURES Bushing Mount Metal Shaft and Bushings Wirewound Solder Lugs Sealable (Full Body Seal) Designed For Use In HMI Applications SPECIFICATIONS ELECTRICAL CHARACTERISTICS Standard Resistance: 10K Ohms Total Resistance Tolerance: ±5 % Independent Linearity: ±0.25 % Effective Electrical Angle: 3600 ° +10 °, -0 ° Absolute Minimum Resistance: 1 Ohm

THIS ITEM IS FOR ONE (1): ALCO SWITCH (TYCO) SUB-MINIATURE PUSHBUTTON SWITCH ALCO P/N: MPA-103C SPST (single pole-single throw) N.O., OFF - (ON) momentary. Bushing, 1/4" RATED: 3 AMPS 125vAC Operating temp.: -20 to +70 degree C. MADE IN THE JAPAN New, old stock, with lock washer and finish mounting nut.

UP FOR AUCTION USED VINTAGE MORSE ADJUSTABLE REAMER

this is new in the pack -- Portable Outlet Box Nylon Cord Connectors HUB Size 3/4" Cord Range .375" - .500" (.95-1.27) Body Material 6/6 Nylon Bushing Material Buna N Grip Operating Temperature

54100-01 25A Series On-Off Toggle Switch SPST On-Off toggle Switch Standard black nylon handle, 11/16" (17.5mm) long. Silver contacts. Mounting stem 15/32" -32 thread, 15/32" (11.9mm) long, fits panels up to 1/8" (31.8mm)

NMTB 50 HORIZONTAL MILLING ARBOR HS-51-1/4 A18-4 POLAND STK4003 1-1/4" SHANK DIAMETER18" SHOULDER TO NUT LENGTHA STYLE4" RUNNING BUSHING Customer service is very important to our business. We continually strive to improve our services in order to meet our customers expectations. Combined shipping is provided whenever possible to help save our customers money for multiple item purchases.