cable ball end for sale, brand-new and used.

DESCRIPTION: USED, MACHINE BALL CRANK. THE BORE IS 7/8"

DESCRIPTION: USED, MACHINE BALL CRANK. THE BORE IS 5/8" WITH A 1/8" KEYWAY. THE HANDLE DOES NOT SPIN

DESCRIPTION: USED, MACHINE SHOP MADE, RADIUS OR BALL MAKING JIG. THE SHANK MEASURES 9/16 X 13/16 H X 3 7/8 LONG. IT USES 3/8 BITS.

DESCRIPTION: USED, MILLING MACHINE BALL CRANK. THE BORE IS 5/8". THE HANDLE HAS RUST ON IT.

These plans are to build a heavy duty sawmill. The saw is a fresh design based on a simple idea that the saw must be extremely strong, very accurate, easy to align and maintain, and cost efficient to build. It was built to cut Mesquite, a very hard wood, so it will make short order of any kind of wood you want to saw.

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

When we introduced our first 200 amp AC/DC inverter machine 10 years ago, we were up against some major competitors. However, the market readily accepted the tough line of HTP Invertig welders. Fast forward to today – HTP introduces our third generation of AC/DC inverter machines, the HTP Invertig 221!

Industrial model, Ball Screws on all axis and over 100 inches per min travel. This is a 24"x 24" x 4.5" CNC. It's milled from 6061 aluminum, 20 mm rods, two precision forged double bearing blocks, and an oil flush connector on each axis.

CNC Plasma KIT X 51" x Y 51" x Z 4" X1300mm x Y 1300mm x Z 100mm