cat 50 tool holders for sale, brand-new and used.

Cat 50 Tool Holders Collet chucks endmill/shellmill holders 1 . #V50TGT00300 2inch collet holder2 . shellmill or endmill holders1 .

END MILL HOLDER CNC CAT40 1/8" x 2.5" BALANCED TO 20,000 RPM "Shars" Hole Diameter: 1/8" Cat: 40 Drawbar Thread: 5/8" -11 Shank Dia: 1/8" Gage Line to Nose: 2.5" Runout: 0.0001" Balanced: G2.5 20000 RPM Tool holder is balanced to G2.5 20,000 RPM on a HAIMER Tool Dynamic Balancing System from Germany. Balanced tool holder m

You are bidding on a Brand new in the Tube, Parlec HSK 63- .500 Shrink Fit End Mill Holder, No. H63E50SF315. Heat shrink holders provide the best solution for High Speed Machining.

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

Up for sale is a Erickson CAT 45 Taper Collet Tool Holder, #CV45TG100300 that is in good condition. It uses the TG type collets and it is approximately 2-3/4"L from the backside of the collar and with the retention knob it is 8"L total. We have tons of quality used tool holders here in our warehouse; including Cat, BT, HSK with 30 taper, 35 taper, 40 taper, and 50 taper shanks!

var itemNumber = window.ebayItemID ?

Shars Clamping Hex Nut for CAT, BT,40/50 ER Stub Nose Rigid Holders NewSHIP FROM U.S. ! SAME DAY SHIPPING !

Used - Good Condition - No Brand Cat 50 V Flange to Cat 40 Adapter . This is the type where the Cat 50 holder is not threade. It requires a drawbar to pass through to the CAT 40 holder and utilize those threads to secure both holders.

SquareTrade © AP6.0 UP TO 2 NEW VALENITE CAT 50 BALANCED EXTENDED LENGTH INSERT CUTTERS You are bidding on up to 2 New Valenite Balanced Extended Length Cat 50 Double Insert Cutters. Each bid is for ONE Cutter.

Metaltech, Pull Stud, BT40, 45 degrees, Thread M16, Length 60mm, Shaf 10mm, New var numImgsLoaded = 0; function autoSizeImageForSlides

The Jacobs CAT V 50 end mill tool holder is designed to hold up to a 1-1/2-Inch shank cutting tool. It has 4.6-Inch projection and is prebalanced to 15,000 RPM. The Jacobs CAT V 50 end mill tool holder is used for heavy duty cutting and general milling.

The Jacobs CAT V 50 Shell/Face mill tool holder is designed to hold up to a 1-1/2-Inch shank cutting tool. It has a 2.4-Inch projection and is prebalanced to 8,000 RPM. The Jacobs CAT V 50 Shell/Face mill tool holder is designed for heavy duty cutting and face milling.

ERICKSON 40 TAPER 1" NMTB QUICK CHANGE ENDMILL TOOL HOLDER You are bidding on a Erickson Erickson 40 Taper 1" Diameter Quick Change Tool Holder. Features Through-spindle coolant capability. Constructed of alloy steel for long, durable service life Made in the "USA" Shiny taper with black oxide finish for the best combination of accuracy and durability.

SAVE BIG MONEY!!! I ship 6 days a week. I offer money back guarantees.

Here we have a Nice used threaded Bolt end, looks like it would mount in the end of a horizontal mill cutter arbor or even in to the drawbar threads of most 50 taper tool holders. Overall length is 3-3/4" Shank size is 1-1/2" x 1-3/4" long then the 45 degree angle taper starts The threads are 1" - 8 TPI right hand

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

????? Canada Quality Machine Shop Welcome to Canada Quality Machine Shop. We supply high quality Cutting tools, measuring tool, machine tool accessories, etc.