center drill dimensions for sale, brand-new and used.

KBC RD-700s Radial Arm Drill Press in good working condition. The arm adjusts about 31 inches from the front to back and about 3 feet up and down on the column. The base rails measure 14" x 30" long.

Heavy duty vise mount assembly for commercial van, truck or utility vehicle. I used an Adrian steel mount years ago and it just did not last. I had 2 custom made for my work van but I don't believe I will need this one.

International buyers must pay their own local duties. We do not mark international parcels as gift. IF YOU HAVE QUESTIONS CALL 1-800-748-1945

General Info: Stock #: MD-151008 Location: GA Brand: WMW Model: BR60-1600-GH SN: 1971 Year: N/A Weight: 9636 Lbs.

Shepherd Hardware 9354 2-Inch Hooded Ball Stem Caster, Bright Brass, 2-Pack Double race ball bearing construction with black soft tread wheel for both carpets and hard surface floors. Use on small sofas, upholstered chairs, TV stands, microwave carts, servers, etc. 5/16" x 1-1/2" stem.

Up for Auction: Vintage No 5 Cleveland Twist Drill Co. Tapered Lathe Dead Center # 6333 as pictured. Pretty decent shape.

MINI ROTARY TABLE 3" / 75MM - HORIZONTAL & VERTICAL Specifications: Table: work holding capacity 3" Diameter Table Height: 1 5/8" Base Dimensions: 4. 1/8" x 3. 1/4" Center Height in Vertical Position: 1.

ROCKWELL15" DRILL PRESSMODEL: 15-081SERIAL NO. 80K80551DOES NOT HAVE A MOTOR!MAX DIST. COLUMN TO SPINDLE CENTER: 7 1/2"NUMBER OF SPINDLES: 1COLUMN SIZE: 3"

(also says Puma 12S on door) Serial Number: 101027 Mfg: 9/96 Specifications: Swing over bed.............................................................. 22.44 Maximum turning diameter............................................. 14.96 Tu

3'6" JOHANSSON SLIDING RAM-TYPE RADIAL DRILL #27657 Serial No 31839, Model 3HP EQUIPPED WITH: Tapping Attachment Manual Table Adjustment Power Arm Elevation w/Power Locks Power Down Feed Tapping Capabilities Jacobs Chuck CATALOGUE SPECIFICATIONS: Arm Length............................. 3' Column Diameter........................ 6" Vertical Arm Travel on Column..........

This is for a #13 Bell Combined Drill & Countersink,HS Black Oxide Finish These countersinks are NEW and sold by the piece. Dimensions: Body Diameter = 1/4", Drill Diameter = 3/32", Bell Diameter = .200, Overall Length = 2" This countersink is recommended for parts passing through several operations where there is a danger of marring the edges of the center hole, thus destroying the accuracy of the center. The

This is for a #14 Bell Combined Drill & Countersink HSS, Bright Steel Finish - MADE IN USA by Viking Drill & Tool These countersinks are NEW and sold by the piece. Dimensions: Body Diameter = 5/16", Drill Diameter = 7/64", Bell Diameter = .250, Overall Length = 2-1/8" This countersink is recommended for parts passing through several operations where there is a danger of marring the edges of the center hole, thus destroying the accuracy of the center. The

This is for a #16 Bell Combined Drill & Countersink,HS Black Oxide Finish - MADE IN USA by TRW These countersinks are NEW and sold by the piece. Dimensions: Body Diameter = 1/2", Drill Diameter = 3/16", Bell Diameter = .400, Overall Length = 3" This countersink is recommended for parts passing through several operations where there is a danger of marring the edges of the center hole, thus destroying the accuracy of the center. The

This is for a #1 Combined Drill & Countersink HS, Bright Steel Finish These countersinks are NEW and sold by the piece. Dimensions: Body Diameter = 1/8", Drill Diameter = 3/64", Overall Length = 1-1/4" The combined drills and countersinks produce the center holes in a part to serve as seats or bearing surfaces for the centers on a machine. This countersink will produce an ordinary 60' (included angle) center which is satisfactory for most applications.&

Topper(Tong-Tai) TMV-510T+APC CNC Drilling & Tapping Machine Stock Number: 3249 Topper (Tongtai) TMV-510+APC Serial No. 9598

RETAIL PRICE NEW IS OVER $4000. This is an excellent used Hardinge HV-4N Indexer. Hardinge Collet Index Fixtures provide a quick and accuragte method of chucking and indexing work.