chemical tank mixer for sale, brand-new and used.

I do not know who manufactured this but it is a quality job. The interior has a 3A polish. It mounts to a port with an ID of approximately four inches.

???? 1 50 Gallon Rung Tank Barrel Mixer Note: If you are International customer out of Canada or USA, please contact with us for consulting the detailed shipping information.

???? 1 50 Gallon Semi-automatic Tank Barrel Mixer Note: If you are International customer out of Canada or USA, please contact with us for consulting the detailed shipping information.

Used Alfa Laval IM15 Rotary Jet Mixer / Tank Agitator Weight: 6.1kg Made from stainless steel 316L Source: From local Beer Manufacturer (in liquidation) More, better photos later. Fast Worldwide Shipping with DHL or GLS. Info: The patented IM 15 is a Rotary Jet Mixer which provides fast and efficient, hydraulically-balanced mixing in tanks.

Used Stainless Steel portable Chemical Mixer Tanks on original casters. Unit was used in photography processing until facility closed down. Has the valve installed and the electrical box for the mix part of the tank on the putter side

Hockmeyer Triple Shaft Vacuum Mixer with Lift. Center Shaft is Sweep Blade with Teflon scrapers. Second shaft is High speed dispersing blade.

SPECIFICATION

This auction is for (one of two identical systems available) Philadelphia Tank Mixers with 5 HP motors and shaft speed of 45 RPM. There are 4 paddles that are 2.5' long 10" wide and the shaft is 2.5" diameter and 10' long from the blades to the flange at the bottom of the mixer drive. The system is rubber coated.

You are bidding on an HR Simon ChemBlend2 X Ray Chemical Mixing Station (Large 10 Gallon Mixer) for use with x-ray film processors. The unit came from a medical practice and was removed from service and is in excellent working condition. It has a tank for the developer and one for the fixer.

You are bidding on an HR Simon ChemBlend X Ray Chemical Mixing Station (Model CBM-20) for use with x-ray film processors. The unit came from a medical practice and was removed from service and is in excellent working condition. It has a tank for the developer and one for the fixer.

(one) chemical slurry mixing blending pump transfer skid, includes slant bottom intake hopper, 30" x 28" x 36" deep with 12" opening at top, Effector high and low limit proximity sensors, hopper bottom electric vibrator, 9’ long x 4" diameter auger screw feeder that dumps into a 16" x 18" x 50" high pre-mix tank compartment with Mamec Oy mixer agitator, model HDS 5.5/1000, 6.5 KW, 1150 rpm, 440/480 vac, direct drive with dual stagger tooth impellers.

???? 1 50 Gallon Semi-automatic Tank Barrel Mixer It is usd for paint mix in paint factory. It is also used for mixing many kinds of dope.It is also used for homogeneity,dispersing in domestic industry,food industry,medicine industry.It is safe to use without spark and anti-explosive.

15 day warranty to repair any defect 60 PSI internal/75 psi jacket will mount on skid for shipping for $150 Weight: 300 lbs Clean Sold "as shown" Bottom mixer, as shown Temperature probe cavity as shown bottom flush drain is hidden beneath anti-vortex plate inside CIP ball on top as shown Return Stainless pipe as shown Specifications shown on image of plate 240/480 blade shaft rotation 1750

Paint Mixer, Agitator Disperser 30 HP with 12 inch Sawtooth Blade and Mix Tank Mixer: Kay Chemical Equipment Tank: 1700 gallon. Tank size; 93 inch high by 75 inch diameter Model: 30 VHS-B6 HP: 30 RPM: 1765 Volt: 230-460 AMPS: 74 / 37 HZ:60 Carmel Group inc. Tel # 514.270-5377

Ultimate Stainless Steel 5 Ingredient Fluid Mixing Plant We have used this as a fertilizer mixing plant, but it could be used for chemical mixing or emulsion asphalt or similar applications. · &n

LIGHTNIN MIXERTANK CHEMICAL MIXER AGITATOR MIXER MODEL: ND-1A MOTOR INFORMATION: 5KH36KG541 1725 RPM 1/4 HP 115V PROPELLER INFORMATION: APPROXIMATE SHAFT LENGTH: 46 1/2" APPROXIMATE SHAFT DIAMETER 5/8" APPROXIMATE BLADE DIAMETER: 7 1/2" NOTICE: PLEASE SEE PICTURES FOR MORE INFORMATION. ITEM HAS NICKS AND SCRATCHES, WHICH DO NOT AFFECT USABILITY.