chicago valve for sale, brand-new and used.

5 BAG NEW, CHICAGO PNEUMATIC, CONTRUCTION TOOLS Z8249416 GENUINE THROTTLE VALVE ASSY FOR BREAKER CP0111 CHLA,CHIT CLAY DIGGERS & CP4129 HEAVY DUTY CHIPPING HAMMER TOOLS Note : Each Bag Come; 01 Valve Throttle, 01 Retainer-O-Ring & 01 Spring Thro

UP TO 3 NEW DELTROL STEEL 1/4" BALL CHECK VALVE C400S This is a Fixed auction for up to 3 New Steel Pneu-Trol Deltrol Check Valve, Model # C400S - 1/4" NPTF THREAD. Each Bid is for ONE Valve. Pneu-Trol Check Valves are available with a ball check.

This is a New Chicago Pneumatic Stem-Valve for CP Tool Models, Part # KF124391. This Chicago Pneumatic Stem-Valve will work on the Chicago Pneumatic Tool Models listed below. Please feel free to let us know if you have any questions.

3M Ultimate FX Full FacepieceBrand NewIncludes Mask with Ammonic/Methylamine CartridgeSize MediumEngineered for maximum comfort, durability and visibility, the Ultimate FX FF-400 is the only respirator with Scotchgard Protector. Offered in three sizes, it features soft yet durable, silicone material and a large lens for superior peripheral vision.

Here is s used but very nice distilled water faucet made by Chicago Water Saver Faucet Co. Had the spring loaded valve and vacuum breaker outler with fritted nozel. From it's mount it is 10" tall and spout extends out to 6 1/2" and valve at 9 1/2".

Older estate find ,this auction is for a antique steam engine whistle/ steam relief valve. Previous owner purchased at some time from an auction and saved the auction tag that reads; "Steam engine whistle / steam relief valve from an old threshing engine - Marked "McRae & Roberts Company Detroit Mich. - Circa 1892 - 1906." It is solid brass and about 4 1/2" long.

The 97131 Vari-Drop® applicator is low cost hand, manually controlled held valve suitable for dispensing low to medium viscosity products. The adjusting screw allows repeatable dispense from drops to heavy beads. The quantity applied is dependent upon on the stroke set for the trigger, and how long the operator holds down the trigger.

The 97111 Hand Held Applicator is for manual dispensing of single component products up to 15,000 cPs viscosity. It is actuated by a finger trigger that is ergonomically designed for comfort, application control and a low actuation force to reduce hand fatigue. It also incorporates a suckback feature which prevents dripping or stringing.

Store Policies - Payment | Returns | Shipping | Contact Us |

Store Policies - Payment | Returns | Shipping | Contact Us |

Enerpac 4 Way Manual Air Valve VA - 4 Enerpac Part Number VA-4 ( Similar to VA-42 ) 4-way, 2-position manual operated air valve. Used to control booster. 30 - 150 PSI.

. Skinner B Series Stainless Steel Solenoid Valve This is a representative picture of this part number. Actual item may slightly vary.

Superior Valve company Sherwood Valves. 1 1/8 base4000 psi safety relief3600 psi valve rating. NEW in boxI use them in CNG DOT bottles 3AA 3600You are bidding on a set of 25.Questions call773-960-5642

Store Policies - Payment | Returns | Shipping | Contact Us |

Store Policies - Payment | Returns | Shipping | Contact Us |

Store Policies - Payment | Returns | Shipping | Contact Us |

Store Policies - Payment | Returns | Shipping | Contact Us |