concentric shaft for sale, brand-new and used.

Lovejoy 1350 Series Shaft Locking Device, Metric, 19 mm shaft diameter x 47mm outer diameter of shaft locking device, 274 ft-lb Maximum Transmissible Torque

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (ONE): BOURNS QUAD (4-gang) POTENTIOMETER DUAL CONCENTRIC SHAFTS (1 shaft inside another shaft to control the 3 pots) VALUES: ALL 4 ARE 10K (10,000) OHMS LINEAR TAPER (2- controlled by 1/4" outside shaft, 2- controlled by 1/8" inside shaft) SHAFT SIZES: 1/8" X 1/2"L & 1/4" X 5/8"L, both round. DIM: 5/8" SQUARE X 1 15/16" BEHIN

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (ONE): BOURNS TRIPLE (3-gang) POTENTIOMETER DUAL CONCENTRIC SHAFTS (1 shaft inside another shaft to control the 3 pots) VALUES: 10K, 10K (10,000) OHMS LINEAR TAPER (BOTH controlled by 1/4", outside shaft) PLUS: 50K (50,000) OHMS LOG TAPER (audio) (controlled by 1/8" inside shaft) ONE POT,TWO TAPERS SHAFT SIZES:&nbs

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (ONE): BOURNS TRIPLE (3-gang) POTENTIOMETER DUAL CONCENTRIC SHAFTS (1 shaft inside another shaft to control the 3 pots) VALUES: 5K, (5,000) OHMS LOG TAPER (controlled by 1/4", outside shaft) PLUS: 50K & 50K (50,000) OHMS REVERSE LOG TAPER (BOTH controlled by 1/8" inside shaft) SHAFT SIZES: 1/8" X 1/4"L & 1/4" X 1/8"L, both round.

Search Shop:

2 x 9mm ALPS Dual Concentric Momentary Spring Return Rotary ON/OFF/ON Switch

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (ONE): ALLEN-BRADLEY MOD POT POTENTIOMETER DUAL CONCENTRIC SHAFTS (1 shaft inside another shaft to control the 2 pots) VALUES: front 20K OHM, rear 20K OHM ( if you need a different value, write. Maybe I can help.) LINEAR TAPERS SHAFT SIZES: 1/8" X 3/8"L w/flat & 1/4" X 3/8"L w/flat

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (ONE): ALLEN-BRADLEY MOD POT POTENTIOMETER DUAL CONCENTRIC SHAFTS (1 shaft inside another shaft to control the 2 pots) VALUES: front 25K OHM, rear 25K OHM ( if you need a different value, write. Maybe I can help.) BOTH LINEAR TAPER SHAFT SIZES: 1/8" X 3/8"L & 1/4" X 3/8"L, both round.

Black Stacked Concentric Knobs w/Separate Pointer Indicators Two separate solid aluminum knobs with a white line indicator on each. Each knob has a knurled circumference. Large knob is 49/64" diameter, 5/8" high and will fit a 1/4" diameter shaft.

Contact us Returns Payment Shipping Abaout us

Contact us Returns Payment Shipping Abaout us

Search Shop:

Concentric gear pump bought from Grainger earlier this year. It worked fine but for my application I needed a piston pump. It did get pretty warm once and was leaking some out of the front seal.

var flashVersion = window.flashVersion ? window.flashVersion : 0;if (flashVersion

Features There are 2pcs small Drill Clamp, It is suitable to the 2.3mm Motor Shaft. The small drill clamp could hold the drill which size is from 0.7 to 1.4mm. Note:

Features There are 2pcs big Drill Clamp, It is suitable to the 2.3mm Motor Shaft. The big drill clamp could hold the drill which size is from 1.8 to 2.2mm. Note:

Model 534 - 20k? Features • Bushing and servo mount designs available• Special resistance tolerances to 1 %• Rear shaft extensions and support bearing• Metric shaft available• Dual gang configuration and concentric shafts• High torque, center tap, slipping clutch on request• Special markings and front shaft extensions Electrical Specifications • Rotation = 3600? (10 turns)• Power Rating (at 70 °C) = 2W• Standard Tolerance = ± 5 %

Greenheck Vector H Isolation FAN VK-H-12-M30-X High Plume Laboratory Exhaust Blower Fan EXPLOSION PROOF PREMIUM EFFICIENCY3-PHASE INDUCTION MOTOR EQP III